- S -
Interrups
Categories
Contents
S/DOS 1.0+ & PTS-DOS 6.51+ - GET OEM REVISION
S3 SpeedUp v3.00+
GET ACTIVE OPTIONS
INSTALLATION CHECK
S3 SpeedUp v3.00+ - SET ACTIVE OPTIONS
S3 SpeedUp v3.10+
GET FLAGS
S3 SpeedUp v3.10+ - RESERVED FUNCTIONS
S3RMDRV.SYS
COPY ??? INTO USER BUFFER
S3RMDRV.SYS - INSTALLATION CHECK / VERSION CHECK
S3VBE/Core2.0 v3.00+
GET ACTIVE OPTIONS
INSTALLATION CHECK
S3VBE/Core2.0 v3.00+ - SET ACTIVE OPTIONS
S3VBE/Core2.0 v3.10+
ACTIVATE SPEED-UP
DEACTIVATE SPEED-UP
S3VBE/Core2.0 v3.10+ - GET VBE/Core CAPABILITIES
Sangoma CCIP (CCPOP 3270 resident module) INTERFACE
Sangoma CCPOP 3270 resident module
Sangoma CCPOP 3270 resident module
Sangoma X.25 INTERFACE PROGRAM
Sanyo MBC-550/555
IRQ0 - 100 HZ INTERRUPT
IRQ1 - ???
IRQ2 - SERIAL PORT USART INTERRUPT
IRQ3 - KEYBOARD USART RECEIVE INTERRUPT
IRQ4 - PRINTER READY INTERRUPT
IRQ5 - FLOPPY DISK CONTROLLER
IRQ6 - 8087 COPROCESSOR INTERRUPT
Sanyo MBC-550/555 - IRQ7 - USER INTERRUPT FOR EXTERNAL INTERRUPT
SB Live! Sound Blaster 16 Emulation Driver - INSTALLATION CHECK
SBOS v3.82
GET ???
SET ???
SET ???
SET ???
SET ???
SET INTERRUPT FOR ???
SBOS v3.82 - UNINSTALL
SBS WinRun 1.00 - TRANSMITTER ENTRY POINT
SBSIM
GETADDRESS - GET SELECTED DRIVER'S ENTRY POINT
GETBUFFERINFO - GET DRIVER'S BUFFER ADDRESS
GETSNDSTAT - GET DRIVER'S STATUS
GETVOLUME - GET SOURCE'S VOLUME
PAUSESND - TEMPORARILY PAUSE PLAYBACK ON SELECTED DRIVER
PLAYSND - PLAY MUSIC/VOICE ON SELECTED DRIVER
QUERYDRIVERS - CHECK DRIVERS INSTALLED
QUERYVERSION - GET VERSION
RESUMESND - RESTART PLAYBACK ON SELECTED DRIVER
SETVOLUME - SET SOURCE'S VOLUME
STARTSND - START SOUND ON SPECIFIED DRIVER
SBSIM - STOPSND - STOP MUSIC/VOICE ON SELECTED DRIVER
ScanBoot - INSTALLATION CHECK
SCOUT v5.4
GET ???
SCOUT v5.4 - INSTALLATION CHECK
Screen Thief v1.00
FREE HIGH MEMORY BUFFERS
RELOCATED IRQ0
RELOCATED IRQ1
RELOCATED IRQ2
RELOCATED IRQ3
RELOCATED IRQ4
RELOCATED IRQ5
RELOCATED IRQ6
Screen Thief v1.00 - RELOCATED IRQ7
SCRNSAV2.COM - INSTALLATION CHECK
SCROLLit v1.7 - INSTALLATION CHECK
SCROLOCK.COM
ENABLE/DISABLE
SCROLOCK.COM - INSTALLATION CHECK
SCSILink
CONNECT TO TARGET
GET ADDRESS
GET DATA
GET ERROR STRING
POLL REQUEST
PUT DATA
RESET SCSI BUS
SEND COMMAND
SET TIMEOUT
SCSILink - TERMINATE SESSION
SD.COM v6.2
Seagate
???
??? - PARK HEADS
??? - RETURN IDENTIFICATION
Seagate - PARK HEADS???
Seagate ST01/ST01 - Set Device Type Qualifier (DTQ)
Seagate ST01/ST02
Inquiry
PARK HEADS
RESERVED
RESERVED FUNCTIONS
RETURN IDENTIFICATION
Seagate ST01/ST02 - SCSI Bus Parity
SecureDevice
DESTROY PASSWORD (LOGOUT FROM DRIVE)
GET INFORMATION
INSTALLATION CHECK
SecureDevice - LOGIN TO DRIVE
SecureDrive - INSTALLATION CHECK
SERIAL
Digiboard DigiCHANNEL PC/X* Extender INT 14 (XAPCM232.SYS)
EXTENDED COMMUNICATION PORT CONTROL (CONVERTIBLE,PS)
EXTENDED INITIALIZE (CONVERTIBLE,PS)
GET PORT STATUS
INITIALIZE PORT
READ CHARACTER FROM PORT
SERIAL - WRITE CHARACTER TO PORT
SETDRVER.COM - RESERVED FOR FUTURE USE
SETDRVER.COM v2.10+
DISABLE TSR
ENABLE TSR
GET ORIGINAL DOS VERSION INFO
GET SETDRVER VERSION
GET TaskMAX STATUS AT INSTALLATION
GET TSR STATUS
INSTALLATION CHECK
SETDRVER.COM v2.10+ - RESET INTERNAL VARIABLES
SETWPR.COM
INSTALLATION CHECK
SETWPR.COM - SET WRITE-PROTECTION STATE
SFS v1.00
DRIVER CONTROL
SFS v1.00 - GET CONFIGURATION INFORMATION
Shamrock Software EMAIL
CHECK FOR USER FUNCTION COMMAND-WORD
GET CURRENT COMMUNICATIONS PARAMETERS
GET ELAPSED ONLINE TIME AND MAXIMUM TIME
GET STATUS
MONITOR XMODEM DOWNLOAD
SEND RESULT OF USER FUNCTION
Shamrock Software EMAIL - SPECIFY COMMAND-WORD FOR USER FUNCTION
Shamrock Software NET.24 v3.11+
ENABLE/DISABLE API FUNCTIONS
END CHARACTER-ORIENTED TRANSMIT
GET STATUS AND TRANSMISSION BUFFER
PREPARE CHARACTER-ORIENTED RECEIVE
PREPARE CHARACTER-ORIENTED TRANSMIT
RECEIVE BLOCK, NO HANDSHAKE
RECEIVE BLOCK, WITH HANDSHAKE
RECEIVE CHARACTER FROM REMOTE
SEND ACK BLOCK
SEND NAK BLOCK
TRANSMIT BLOCK, NO HANDSHAKE
TRANSMIT COMMAND, WITH HANDSHAKE
Shamrock Software NET.24 v3.11+ - TRANSMIT SINGLE CHARACTER TO REMOTE
SHARE - INSTALLATION CHECK
Show Partner F/X v3.6
START PRESENTATION
Show Partner F/X v3.6 - UNINSTALL
ShowGFX - INSTALLATION CHECK
SilverNET
GET RUNTIME PARAMETER
SilverNET - SET RUNTIME PARAMETERS
SilverNET v2+ - INSTALLATION CHECK
SitBack v3.02R
???
???
???
???
CLEAR ??? FLAG
GET ???
GET DTA
GET RESIDENT DATA SEGMENT
INSTALLATION CHECK
SET ??? FLAG
SET ??? FLAG AND GET ??? ADDRESS
SitBack v3.02R - TOGGLE ???
SK-UPPS Data Link Interface API
CHANGE DRIVER ADDRESS
CLIENT HOOK
CLIENT UNHOOK
DISABLE MULTICAST
DISABLE PROTOCOL
DLI 2.5+ - GET DRIVER INFO
DLI 2.6+ - GET MEDIA STATISTICS
DLI 2.8+ - DRIVER I/O CONTROL
DLI 2.8+ - INTERRUPT REQUEST
DOWN DRIVER
FEED BACK BUFFER
GET DRIVER STATISTICS
GET DRIVER STATUS
GET DRIVER VERSION
GET MULTICAST LIST
GET PROTOCOL LIST
GET PROTOCOL STATUS
REGISTER MULTICAST
REGISTER PROTOCOL
RELEASE BUFFER
REQUEST BUFFER
SYNC REQUEST BUFFER
TRANSMIT FRAME
SK-UPPS Data Link Interface API - TRANSMIT FRAME RELEASE
SK-UPPS/SK-PASSPORT Data Link Interface (DLI) API
SKUDO - INSTALLATION CHECK
Smart Prompt - INSTALLATION CHECK
SMARTDRV v4.00+
CHECK IF DRIVE CACHEABLE
FLUSH BUFFERS (COMMIT CACHE)
GET CACHE SIZE
GET DEVICE DRIVER FOR DRIVE
GET DOUBLE-BUFFER STATUS
GET ELEMENT STATUS TABLE
INSTALLATION CHECK AND HIT RATIOS
RESET CACHE
SIGNAL SERIOUS ERROR
SMARTDRV v4.00+ - STATUS
SMARTDRV v4.20+ - GET/SET FLUSH BEFORE PROMPT, CD-ROM SUPPORT
SMARTDRV.SYS v3.x only
IOCTL - CACHE CONTROL
SMARTDRV.SYS v3.x only - IOCTL - GET CACHE STATUS
Smooth Mouse Driver, PrecisePoint
DISABLE SMOOTH MOUSE
ENABLE SMOOTH MOUSE
GET INFORMATION
INSTALLATION CHECK
RESERVED FUTURE EXPANSION
Smooth Mouse Driver, PrecisePoint - RESERVED FUTURE EXPANSION
SNAP.EXE 3.2+
SNAP_802_5 - ???
SNAP_ALLOC - ALLOCATE BUFFER IN SNAP DATA SEGMENT
SNAP_BEGINCONV - BEGIN CONVERSATION
SNAP_CHKINSTALL - INSTALLATION CHECK
SNAP_CLIENTVERSION - ???
SNAP_COPYFROM - COPY DATA FROM RESIDENT SNAP PACKAGE
SNAP_COPYTO - COPY DATA TO RESIDENT SNAP PACKAGE
SNAP_DATASEG - GET RESIDENT DATA SEGMENT
SNAP_ENDCONV - END CONVERSATION
SNAP_FREE - DEALLOCATE BUFFER IN SNAP DATA SEGMENT
SNAP_GETANCHOR
SNAP_NOP - ???
SNAP_SENDNOREPLY - SEND MSG, DON'T AWAIT REPLY
SNAP_SENDWITHREPLY - SEND MSG AND GET REPLY
SNAP_SETANCHOR
SNAP_SETCONVPARMS - SET CONVERSATION PARAMETERS
SNAP_SETDEBUG - SET ???
SNAP.EXE 3.2+ - SNAP_VERSION - GET VERSION
SNAP.EXE 3.4
???
SNAP.EXE 3.4 - ???
SND
INSTALLATION CHECK???
PAUSE
PLAY MUSIC STRING IN BACKGROUND
START SOUND
STOP SOUND
SND - UNCONDITIONALLY STOP SOUND
Soft-ICE
BACK DOOR COMMANDS - ???
BACK DOOR COMMANDS - DISPLAY STRING IN Soft-ICE WINDOW
BACK DOOR COMMANDS - EXECUTE Soft-ICE COMMAND
BACK DOOR COMMANDS - GET BREAKPOINT INFORMATION
Soft-ICE - BACK DOOR COMMANDS - GET Soft-ICE VERSION
Soft-ICE v2.5x
BACK DOOR COMMANDS - REMOVE Soft-ICE BREAKPOINT
Soft-ICE v2.5x - BACK DOOR COMMANDS - SET Soft-ICE BREAKPOINT
Soft-ICE v2.80
BACK DOOR COMMANDS - ???
BACK DOOR COMMANDS - ???
BACK DOOR COMMANDS - ???
BACK DOOR COMMANDS - ???
BACK DOOR COMMANDS - ???
BACK DOOR COMMANDS - ???
BACK DOOR COMMANDS - ???
BACK DOOR COMMANDS - ???
BACK DOOR COMMANDS - ???
BACK DOOR COMMANDS - ???
BACK DOOR COMMANDS - ???
BACK DOOR COMMANDS - ???
Soft-ICE v2.80 - BACK DOOR COMMANDS - POPUP & START A DEBUG SESSION
SoftLogic Data Guardian - ???
Software Carousel
BOOT THE SYSTEM
CHANGE PARTITION NAME
CHANGE PARTITION SIZE
ENABLE DOS-CALL SAFETY NOTIFICATION
GET MEMORY SIZE/PARTITION NUMBER OF CURRENT TASK
GET PARTITION NAME
GET PARTITION SIZE AND PROGRAM STATUS
INSTALLATION CHECK
KILL PROGRAM IN MEMORY PARTITION
SELECTIVELY ENABLE/DISABLE MENU AND SWITCHING
SEND COMMAND TO MEMORY SECTION
SET TASK SWITCH CALLBACK
Software Carousel - SWITCH TO ANOTHER TASK
SOLLEX SuperVGA
ADAPTER CONTROL - DETERMINE ADAPTER SUPPORT
ADAPTER CONTROL - GET ADAPTER
ADAPTER CONTROL - SET ADAPTER
DISPLAY OUTPUT CONTROL - GET DISPLAY OUTPUT
DISPLAY OUTPUT CONTROL - SET DISPLAY OUTPUT
FILL VIDEO RAM
GET EXTENSIONS INFO
LOAD REGISTER
MULTIPLE FONT CONTROL
POWER CONTROL - GET POWER STATE
POWER CONTROL - GET TIMEOUT RESET
POWER CONTROL - SET POWER STATE
POWER CONTROL - SET TIMEOUT RESET
VIDEO SUPPORT CONTROL - GET SUPPORT INFO
VIDEO SUPPORT CONTROL - GO RAM RESIDENT
SOLLEX SuperVGA - VIDEO SUPPORT CONTROL - INITIALIZE VIDEO SUPPORT
SoundBlaster - POINTER TO ECHO VALUE
SoundBlaster SBFM driver
GET VERSION
PAUSE MUSIC
PLAY MUSIC
RESET DRIVER
RESUME MUSIC
SET DRIVER CLOCK RATE
SET INSTRUMENT TABLE
SET MUSIC STATUS BYTE ADDRESS
SET SYSTEM CLOCK RATE
SET USER-DEF TRAP FOR SYSTEM-EXCLUSIVE CMDS
STOP MUSIC
SoundBlaster SBFM driver - TRANSPOSE MUSIC
SoundBlaster speech driver - INSTALLATION CHECK
SpaceManager
???
???
CHECK WHETHER PROGRAM ENABLED
DISABLE PROGRAM
ENABLE PROGRAM
FORTUNE.EXE - NOP
GET PER-DRIVE ENABLEMENT TABLE
INSTALLATION CHECK
INSTALLATION VERIFICATION
SELECTC - ???
SpaceManager - SELECTC - ???
SPEECH.COM - CONVERT TEXT STRING TO SPEECH
SPEEDSCR.COM - INSTALLATION CHECK
SpeedSTAR Plus BIOS v4.23+ - SET SYNC PARAMETERS
Sperry PC
GET REAL-TIME CLOCK DATE
Sperry PC - SET REAL-TIME CLOCK DATE
SPHINX C-- - WB.COM - API
SQL Base
DATABASE ENGINE API
SQL Base - GET VERSION NUMBER
SRDISK v1.30+ - INSTALLATION CHECK
SRDISK v2.02 - GET CODE/DATA SEGMENT
SRSoft MODAL PC v2+
ALLOCATE COMMON MEMORY
GET A COMMON VARIABLE OR SEMAPHORE
GET ALL COMMON VARIABLES AND SEMAPHORES
GET PROCESS RUN PARAMETER
INSTALLATION CHECK / GET VERSION
SET A COMMON VARIABLE OR SEMAPHORE
SET ALL COMMON VARIABLES AND SEMAPHORES
SRSoft MODAL PC v2+ - SET PROCESS EXIT CODE
Stac STACKER - INSTALLATION CHECK
Stacker
GET DEVICE DRIVER ADDRESS
GET DEVICE DRIVER ADDRESS AND SET VOLUME NUMBER
Stacker - GET STACVOL FILE SECTORS
Stacker 4 LZS Compression Interface (LZSAPI)
StackMan
INSTALLATION BROADCAST
REQUEST NEW STACK
StackMan - RESTORE ORIGINAL STACK
STARLITE architecture
BIND TO NETWORK DEVICE
DETACH FROM NETWORK DEVICE
KERNEL API
MAKE NAMED OBJECT AVAILABLE ON NETWORK
MAP LOCAL DRIVE LETTER TO REMOTE FILE SYSTEM
REMOVE GLOBAL NETWORK NAME OF OBJECT
STARLITE architecture - UNMAP DRIVE LETTER
STB RAPIDMAP.SYS - ???
StopPrg v2.0 - INSTALLATION CHECK
STRETCH - INSTALLATION CHECK
STSC APL*PLUS/PC
MAY BE USED IN FUTURE RELEASES
MAY BE USED IN FUTURE RELEASES
MAY BE USED IN FUTURE RELEASES
MAY BE USED IN FUTURE RELEASES
MAY BE USED IN FUTURE RELEASES
MAY BE USED IN FUTURE RELEASES
MAY BE USED IN FUTURE RELEASES
MAY BE USED IN FUTURE RELEASES
MAY BE USED IN FUTURE RELEASES
MAY BE USED IN FUTURE RELEASES
MAY BE USED IN FUTURE RELEASES
MAY BE USED IN FUTURE RELEASES
MAY BE USED IN FUTURE RELEASES
MAY BE USED IN FUTURE RELEASES
STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES
STSC APL*PLUS/PC v9.0 - PLACE KEYSTROKE EVENTS IN INPUT BUFFER
StuffIt v3.21+ - INSTALLATION CHECK
Sun PC-NFS - API???
Super PC-Kwik 5.1
???
???
Super PC-Kwik 5.1 - EXITCODE RETRIEVAL NOTIFICATION
Super PC-Kwik v3.20+
???
???
???
???
???
???
???
FLUSH CACHE
GET RESIDENT CODE SEGMENT
Super PC-Kwik v3.20+ - INSTALLATION CHECK
Super PC-Kwik v4+
???
???
???
Super PC-Kwik v4+ - ???
Super PC-Kwik v4.00+
???
???
Super PC-Kwik v4.00+ - ???
Super PC-Kwik v5.10+
???
???
???
???
???
???
???
???
???
???
???
???
???
???
???
DISABLE CACHE
ENABLE CACHE
PROGRAM LOAD NOTIFICATION
Super PC-Kwik v5.10+ - PROGRAM TERMINATION NOTIFICATION
Super-TCP DOS TSR Kernel v3.57
???
???
ALLOCATE ???
FREE/CLOSE ???
FREE/CLOSE ALL ???
GET ??? DATA AREA
INSTALLATION CHECK
Super-TCP DOS TSR Kernel v3.57 - UNINSTALL
SUPERSTOR - IOCTL - INSTALL CHECK
SuperStor PRO 2XON.COM
INSTALLATION CHECK
SuperStor PRO 2XON.COM - UNINSTALL
SWBIOS
GET EXTENDED CYLINDER COUNT
INSTALLATION CHECK
SWBIOS - SET 1024-CYLINDER FLAG
SWELL.EXE
ACTIVATE
GET INFO
INSTALLATION CHECK
SUSPEND
SUSPEND ONCE
TURN OFF BORLAND SUPPORT
TURN OFF VERBOSE MODE
TURN ON BORLAND SUPPORT
TURN ON VERBOSE MODE
UNINSTALL
SWELL.EXE - UNUSED
Switch-It v3.23
???
???
???
CLEAR ???
GET ???
GET ???
GET ???
GET ???
GET ???
GET ???
GET ???
GET ???
GET ???
GET ??? PROGRAM
GET CONFIGURATION FILE
GET MEMORY ADDRESSES???
INSTALLATION CHECK
NOP
SET ???
SET ???
SET ???
SET ???
SET ???
SET ???
SET ??? FLAG
Switch-It v3.23 - SET ??? FLAG
SyQuest
DOOR LATCH/DOOR BUTTON DETECT
Generic SCSI pass through
READ DRIVE PARAMATERS (for DOS 5+)
SyQuest - START/STOP SCSI DISK
SYSTEM
(DE)ACTIVATE INTERNAL MODEM POWER (CONVERTIBLE)
BOOTSTRAP LOADER
BUILD ABIOS INITIALIZATION TABLE (PS)
BUILD ABIOS SYSTEM PARAMETER TABLE (PS)
COPY EXTENDED MEMORY
ENABLE/DISABLE PROCESSOR FUNCTIONS
ENABLE/DISABLE WATCHDOG TIMEOUT (PS50+)
FORMAT UNIT PERIODIC INTERRUPT (PS ESDI drives only)
GET CONFIGURATION (XT >1986/1/10,AT mdl 3x9,CONV,XT286,PS)
GET EXTENDED MEMORY SIZE (286+)
later PS/2s - DISABLE A20 GATE
later PS/2s - ENABLE A20 GATE
later PS/2s - EXPANSION UNIT, RETURN CONFIGURATION NUMBER
later PS/2s - GET A20 GATE STATUS
later PS/2s - LOCATE ROM BASIC
later PS/2s - QUERY A20 GATE SUPPORT
later PS/2s - RETURN MEMORY-MAP INFORMATION
POINTING DEVICE BIOS INTERFACE (PS) - ENABLE/DISABLE
POINTING DEVICE BIOS INTERFACE (PS) - EXTENDED COMMANDS
POINTING DEVICE BIOS INTERFACE (PS) - GET TYPE
POINTING DEVICE BIOS INTERFACE (PS) - INITIALIZE
POINTING DEVICE BIOS INTERFACE (PS) - RESET
POINTING DEVICE BIOS INTERFACE (PS) - SET DEVICE HANDLER ADDR
POINTING DEVICE BIOS INTERFACE (PS) - SET RESOLUTION
POINTING DEVICE BIOS INTERFACE (PS) - SET SAMPLING RATE
POINTING DEVICE BIOS INTERFACE - READ FROM POINTER PORT
POINTING DEVICE BIOS INTERFACE - WRITE TO POINTER PORT
POWER-ON SELF-TEST ERROR LOG (PS50+)
PROGRAMMABLE OPTION SELECT (PS50+)
READ SYSTEM STATUS (CONVERTIBLE)
READ/MODIFY PROFILES (CONVERTIBLE)
REQUEST POWER OFF (CONVERTIBLE,HP 95LX)
RETURN EXTENDED-BIOS DATA-AREA SEGMENT ADDRESS (PS)
SWITCH TO PROTECTED MODE
USER ALARM HANDLER
SYSTEM - WAIT ON EXTERNAL EVENT (CONVERTIBLE and some others)
SYSTEM DATA
8x8 GRAPHICS FONT
DISKETTE PARAMETERS
HARD DISK 0 PARAMETER TABLE ADDRESS [NOT A VECTOR!]
HARD DISK 1 DRIVE PARAMETER TABLE ADDRESS [NOT A VECTOR!]
NON-KEYBOARD SCAN-CODE TRANSLATION TABLE (PCjr)
SYSTEM DATA - VIDEO PARAMETER TABLES
SYSTEM FOSSIL
System resume vector (CONVERTIBLE)
SYS_PROF.EXE
CLEAR PROFILING TABLE
GET ADDRESS OF PROFILING TABLE
PROFILER STATUS
TURN PROFILING OFF
SYS_PROF.EXE - TURN PROFILING ON
Interrups
Categories
Contents
Shopping
Forum
EMail
Index
Home
Search the web with Google