|
| Interrups | Categories | Contents |
AH = 01h ES:BX -> buffer for CAPI's use (refer to note below) CX = minimum number of pending messages DX = maximum simultaneous Level 3 connections SI = maximum concurrent received B3 data blocks DI = maximum B3 data block size
Return:
AX = CAPI-assigned application ID 0000h on error BX = error number 1001h registration errorRange:
INT 00 to INT FF, selectable by program parameter
Notes: The caller is required to provide at least 512 bytes of stack space. The CAPI interrupt handler begins with a header which is nearly identical to the IBM Interrupt Sharing Protocol header (see #02568 at INT 2D"AMIS"), except that the short jump instruction to a hardware reset handler at offset 09h is replaced by the signature bytes "IA". The maximum length of a message is fixed at 180 bytes; the standard document suggests using CX=10, DI=1, SI=7, and DI=130 for applications which use only a single connection and standard protocols. The total size of the application-provided buffer must be at least 180*CX + DX*SI*DI bytes
See Also: AH=02h - INT F1/AL=01h
Index:
Installation check;Common ISDN API
Category: Uncatagorized - Int F1h - C
|
| Interrups | Categories | Contents |
|
