Interrups

Categories

Contents

• AAKEYS
  • DISABLE AAKEYS
  • EMPTY BIOS KEYBOARD BUFFER
  • EMPTY KEY-EVENT BUFFER
  • GET KEY-EVENT BUFFER
  • AAKEYS - GET NEXT KEYBOARD EVENT

• AccessDOS - API

• Acorn BBC Master 512
  • OSARGS - GET/SET FILE PARAMS FOR OPEN FILE
  • OSARGS - GET/SET FILE PARAMS FOR OPEN FILE
  • OSASCI - WRITE CHARACTER TO CUR OUTPUT STREAM
  • OSBGET - READ SINGLE BYTE FROM FILE
  • OSBPUT - WRITE SINGLE BYTE TO FILE
  • OSBYTE - MISC FUNCTIONS USING REGISTER PARAMS
  • OSCLI - INTERPRET COMMAND LINE
  • OSFILE - READ/WRITE FILE OR DIRECTORY INFO
  • OSFIND - OPEN FILE
  • OSGBPB - MULTI-BYTE GET/PUT
  • OSNEWL - SEND NEWLINE TO OUTPUT STREAM
  • OSRDCH - GET CHARACTER FROM CUR INPUT STREAM
  • OSWORD - MISC FUNCTIONS USING CONTROL BLOCK
  • Acorn BBC Master 512 - OSWRCH - WRITE CHARACTER TO CUR OUTPUT STREAM

• Ad Lib SOUND.COM
  • GET ACTIVE VOICE
  • GET MODE
  • GET STATE
  • INITIALIZE (RESET)
  • INTERFACE
  • SET ACTIVE VOICE
  • SET MODE
  • Ad Lib SOUND.COM - SET STATE

• AD-DOS
  • ???
  • ???
  • CHECK FOR NEW INPUT
  • GET AND RESET VxD API STATUS
  • GET BLANKER STATUS
  • GET CURRENT HOT KEY
  • GET MINUTES TO WAIT
  • GET PASSWORD STATUS
  • GET RESIDENT CODE SEGMENT
  • INSTALLATION CHECK
  • SET ??? INTERNAL FLAG TO 01h
  • SET BLANKER STATUS
  • SET HOT KEY
  • SET MINUTES TO WAIT
  • SET PASSWORD STATUS
  • AD-DOS - UNBLANK MONITOR

• Adaptec AHA-154xA/Bustek BT-542 BIOS - IDENTIFY SCSI DEVICES

• Adaptec and OMTI controllers
  • DRIVE 0 DATA
  • DRIVE 0 DATA
  • DRIVE 0 DATA
  • Adaptec and OMTI controllers - DRIVE 0 DATA

• Adaptec controllers
  • DRIVE 1 DATA
  • DRIVE 1 DATA
  • DRIVE 1 DATA
  • Adaptec controllers - DRIVE 1 DATA

• ADP-60 IDE adapter - ???
• ADP-60 IDE controller - ORIGINAL INT 13
• Advanced Power Management

• Advanced Power Management v1.0+
  • CONNECT 16-BIT PROTMODE INTERFACE
  • CONNECT 32-BIT PROTMODE INTERFACE
  • CONNECT REAL-MODE INTERFACE
  • CPU BUSY
  • CPU IDLE
  • DISCONNECT INTERFACE
  • ENABLE/DISABLE POWER MANAGEMENT
  • GET POWER MANAGEMENT EVENT
  • GET POWER STATUS
  • INSTALLATION CHECK
  • RESTORE POWER-ON DEFAULTS
  • SET POWER STATE
  • SUSPEND SYSTEM
  • Advanced Power Management v1.0+ - SYSTEM STAND-BY

• Advanced Power Management v1.1
  • OEM APM FUNCTIONS
  • Advanced Power Management v1.1 - OEM APM INSTALLATION CHECK

• Advanced Power Management v1.1+
  • DRIVER VERSION
  • EN/DISABLE DEVICE POWER MANAGEMENT
  • ENGAGE/DISENGAGE POWER MANAGEMENT
  • Advanced Power Management v1.1+ - GET POWER STATE

• Advanced Power Management v1.2
  • ENABLE/DISABLE RESUME ON RING
  • ENABLE/DISABLE TIMER-BASED REQUESTS
  • GET CAPABILITIES
  • GET/SET/DISABLE RESUME TIMER
  • Advanced Power Management v1.2 - TURN OFF SYSTEM

• Advanced SCSI Programming Interface (ASPI) - INTERFACE
• Agfa TTSR.EXE - API

• AI Architects
  • ??? - INSTALLATION CHECK
  • AI Architects - OS/x86??? - API

• Alloy 386/MultiWare (MW386), Novell-Type Network Executive (NTNX)
• Alloy ANSK, NTNX (Slave) - DUMP STRING TO TERMINAL

• Alloy ANSK, NTNX, MW386
  • GET NETWORK EXECUTIVE TYPE
  • GET NETWORK EXECUTIVE VERSION
  • Alloy ANSK, NTNX, MW386 - GET USER NUMBER

• Alloy MW386
  • ASSIGN DIRECTORY TO GROUP
  • ASSIGN GROUP NAME
  • ASSIGN USER TO GROUP
  • ATTACH LOGICAL COMMUNICATIONS PORT TO PHYSICAL PORT
  • CHANGE CONSOLE MODE
  • CHANGE NAME OF DOS TASK
  • CHANGE TEMPORARY SPOOL DRIVE
  • CHECK SPOOLER
  • CREATE DOS TASK
  • DEFINE TEMPORARY FILENAME
  • DOS TASK DELAY
  • ENABLE/DISABLE AUTOBAUD DETECT
  • ENABLE/DISABLE BANNER PAGE
  • ENABLE/DISABLE FORM FEED
  • FLUSH DISK BUFFERS
  • FORCE WORKSTATION SCREEN UPDATE
  • GET DEVICE NAME FROM PHYSICAL DEVICE NUMBER
  • GET DOS TASK PID FROM CREATE ID
  • GET GROUP NAME
  • GET MACHINE, USER, AND PROCESS NUMBER
  • GET NUMBER OF AVAILABLE USER TASKS
  • GET PHYSICAL DEVICE NUMBER FROM NAME
  • GET PHYSICAL WORKSTATION ADAPTER TYPE
  • GET PHYSICAL WORKSTATION DISPLAY MODE
  • GET PORT INFORMATION
  • GET PROCESS NUMBER FROM TASK NAME
  • GET TASK NAME FROM PROCESS NUMBER
  • GET TERMINAL PARAMETERS
  • GET USER GROUP LIST
  • GET USER LOGIN STATE
  • GET USER NAME
  • GET USER PRIVILEGE LEVEL
  • GET USER STATUS
  • INHIBIT WORKSTATION SCREEN UPDATES
  • LOCK SEMAPHORE FOR USER
  • POST EVENT
  • POST TERMINAL CONFIGURATION CHANGES
  • READ CONSOLE DATA BYTE
  • READ CONSOLE DATA INTO BUFFER
  • READ RESTRICTED DIRECTORY ENTRY
  • READ RESTRICTED DIRECTORY ENTRY FOR GROUP
  • REDRAW SCREEN
  • REMOVE DOS TASK
  • REMOVE USER FROM GROUP
  • RESET NETWORK EXECUTIVE
  • RESTRICT DIRECTORY TO GROUP
  • SET TERMINAL DRIVER FOR ANOTHER USER
  • SET TERMINAL PARAMETERS
  • SET USER STATUS
  • SPOOL COPY OF FILE
  • SWITCH TO NEW DOS TASK
  • UNLOCK SEMAPHORE FOR USER
  • VERIFY USER PASSWORD
  • WRITE BYTE TO CONSOLE PORT
  • Alloy MW386 - WRITE BYTE TO TERMINAL AUX PORT

• Alloy MW386 v1.x only
  • CHECK PORT ASSIGNMENT
  • Alloy MW386 v1.x only - RELEASE PHYSICAL COMMUNICATIONS PORT

• Alloy MW386 v2+
  • CHANGE PHYSICAL PORT PARAMETERS
  • GET MW386 INVOCATION DRIVE
  • GET PORT NUMBER FROM LOGICAL PORT ID
  • GET REAL-TIME PRINTER STATUS
  • GET/SET SPOOL FLAGS
  • RELEASE LOGICAL COMMUNICATIONS PORT
  • SET ERROR MODE
  • Alloy MW386 v2+ - SET FCB MODE

• Alloy NetWare Support Kit (ANSK) v2.2+ - INSTALLATION CHECK

• Alloy NTNX (Host)
  • GET INTERRUPT VECTORS
  • GET SEMAPHORE TABLE
  • GET SHARED DRIVE INFO
  • LOCK/UNLOCK SYSTEM, SPOOLER CONTROL
  • Alloy NTNX (Host) - SET/RESET GRAPHICS DOS ON SLAVE

• Alloy NTNX (Host), MW386 - GET BUSY POINTER
• Alloy NTNX (Slave) - ALLOCATE FREE CLUSTER ON SHARED DRIVE

• Alloy NTNX (Slave), MW386
  • GET USER PARAMETERS
  • Alloy NTNX (Slave), MW386 - SET NEW TERMINAL DRIVER

• Alloy NTNX
  • ACTIVATE USER-WRITTEN PRINTER DRIVER
  • ATTACH DEVICE FOR USER
  • ATTACH/RELEASE HOST PROCESSOR
  • CANCEL FLUSH ON WRITE
  • CHECK PRINTER DRIVER
  • ENABLE/DISABLE MUD FILE CHECKING
  • GET DOS INTERCEPT ENTRY POINT
  • GET INT 28 ENTRY POINT
  • GET MESSAGE
  • GET SYSTEM FLAGS
  • LOCK FILE FOR USER
  • REBOOT USER PROCESSOR
  • RELEASE DEVICE FOR USER
  • RELEASE DEVICES FOR USER
  • RELEASE FILES FOR USER
  • RELEASE MESSAGES FOR USER
  • SET FILE I/O CHECKING LEVEL
  • SET INDOS POINTER
  • SET MESSAGE DISPLAY TIMEOUT
  • SET SERIAL PORT PARAMETERS
  • SWITCH HOST TO DEDICATED MODE
  • Alloy NTNX - UNLOCK FILE FOR USER

• Alloy NTNX, MW386
  • SET RECEIVE ISR
  • ACKNOWLEDGE DATAGRAM
  • ADD PRINTER TO SPOOLER
  • ATTACH OR RELEASE DRIVE FOR LOW-LEVEL WRITE ACCESS
  • CANCEL ALL JOBS FOR CURRENT USER
  • CANCEL JOBS FOR CURRENT USER
  • CHANNEL CONTROL - CLOSE ALL CHANNELS
  • CHANNEL CONTROL - CLOSE CHANNEL
  • CHANNEL CONTROL - LOCK ALL OPEN CHANNELS
  • CHANNEL CONTROL - LOCK CHANNEL
  • CHANNEL CONTROL - LOCK MULTIPLE CHANNELS
  • CHANNEL CONTROL - OPEN CHANNEL
  • CHANNEL CONTROL - RELEASE BUFFER
  • CHANNEL CONTROL - UNLOCK ALL LOCKED IDLE CHANNELS
  • CHANNEL CONTROL - UNLOCK CHANNEL
  • CHANNEL CONTROL - UNLOCK MULTIPLE CHANNELS
  • DIRECT MEMORY TRANSFER
  • GENERATE PRINT BREAK
  • GET ACKNOWLEDGE ISR
  • GET AND CLEAR ACKNOWLEDGE STATUS
  • GET CHANNEL STATUS
  • GET CURRENT PRINTER
  • GET LIST OF SHARED DRIVES
  • GET MAXIMUM NUMBER OF CHANNELS
  • GET MAXIMUM PACKET SIZE
  • GET NEXT FULL CHANNEL
  • GET NTNX FILE MODE
  • GET NUMBER OF USERS
  • GET RECEIVE ISR
  • GET USER NUMBER AND CURRENT PRINTER
  • GET/SET PRINTER MODE
  • RELEASE ALL SEMAPHORES FOR USER
  • RELEASE NORMAL SEMAPHORES FOR USER
  • RELEASE SEMAPHORE
  • REMOVE PRINTER FROM SPOOLER
  • RESET USER DATAGRAMS
  • SELECT PRINTER
  • SEMAPHORE LOCK
  • SEMAPHORE LOCK AND WAIT
  • SEND DATAGRAM
  • SEND MESSAGE OR COMMAND TO USER(S)
  • SET ACKNOWLEDGE ISR
  • SET CHANNEL BUFFER POINTER
  • SET DATA DRIVEN PRINT BREAK
  • SET NUMBER OF COPIES
  • Alloy NTNX, MW386 - SPOOL FILE BY NAME

• Alloy NTNX,MW386
  • GET ALTERNATE INTERRUPT
  • RESET SPOOLER
  • RESTART PRINTER
  • SET PRINT BREAK TIMEOUT
  • Alloy NTNX,MW386 - SET TAB EXPANSION

• ALTERNATE MULTIPLEX INTERRUPT SPECIFICATION (AMIS) [v3.6]
• ALTMENU - GET POINTER TO KEY CODE

• AMI BIOS
  • BIOS-FLASH Interface - RESTORE CHIPSET STATUS
  • BIOS-FLASH Interface - FLASH DE-SELECT
  • BIOS-FLASH Interface - FLASH SELECT
  • BIOS-FLASH Interface - FLASH WRITE ENABLE
  • BIOS-FLASH Interface - FLASH WRITE PROTECT
  • BIOS-FLASH Interface - GENERATE CPU RESET
  • BIOS-FLASH Interface - GET CHIPSET SAVE/RESTORE SIZE
  • BIOS-FLASH Interface - GET VERSION NUMBER
  • BIOS-FLASH Interface - LOWER PROGRAMMING VOLTAGE Vpp
  • BIOS-FLASH Interface - RAISE PROGRAMMING VOLTAGE Vpp
  • BIOS-FLASH Interface - RESTORE INTERNAL CACHE STATUS
  • BIOS-FLASH Interface - SAVE CHIPSET STATUS & PREPARE CHPSET
  • BIOS-FLASH Interface - SAVE INTERNAL CACHE STATUS
  • BIOS-FLASH Interface - VERIFY ALLOCATED MEMORY
  • DRIVE 0 DATA
  • DRIVE 0 DATA
  • DRIVE 0 DATA
  • DRIVE 0 DATA
  • DRIVE 1 DATA
  • DRIVE 1 DATA
  • DRIVE 1 DATA
  • DRIVE 1 DATA
  • Flash ROM - GET BIOS REVISION
  • Flash ROM - GET BIOS SUBSYSTEM INFORMATION
  • Flash ROM - GET FLASH ROM PROGRAMMING CODE
  • Flash ROM - GET SIZE OF FLASH ROM PROGRAMMING CODE
  • AMI BIOS - Flash ROM - READ FLASH BIOS

• AMI BIOS v1.00.12.AX1T - internal - BIOS SUBSYSTEM SELECTION

• AMI IAM.SYS
  • CLEAR ???
  • AMI IAM.SYS - INSTALL ??? CALLBACK

• AMI PCI BIOS
  • ???
  • ???
  • ???
  • CPU SPEED CONTROL
  • GET ??? AND BIOS REVISION STRINGS
  • GET ??? AND BIOS REVISION STRINGS
  • GET BIOS AND CHIPSET IDENTIFICATION
  • GET CPU TYPE AND SPEED
  • GET EXTENDED MEMORY SIZE
  • GET/SET ???
  • GET/SET ???
  • GET/SET ??? FLAG
  • SET ??? FLAG
  • AMI PCI BIOS - v1.00.05.AX1 - ???

• AMI PCI BIOS v1.00.05.AX1 - ???
• AMI PCI BIOS v1.00.12.AX1T - CMOS RAM BITFIELD MANIPULATION
• AMI WinBIOS - SECOND HARD DRIVE AUTODETECTION
• AMIGATSR - INSTALLATION CHECK

• AMIS v3.0+
  • DETERMINE CHAINED INTERRUPTS
  • GET PRIVATE ENTRY POINT
  • INSTALLATION CHECK
  • REQUEST POP-UP
  • AMIS v3.0+ - UNINSTALL

• AMIS v3.5+ - GET HOTKEYS
• AMIS v3.6 - GET DEVICE-DRIVER INFORMATION

• Amstrad PC1512
  • GET AND RESET MOUSE COUNTS
  • GET ROS VERSION NUMBER
  • READ DATA FROM NON-VOLATILE RAM
  • WRITE DATA TO NON-VOLATILE RAM
  • WRITE VDU COLOR PLANE READ REGISTER
  • WRITE VDU COLOR PLANE WRITE REGISTER
  • Amstrad PC1512 - WRITE VDU GRAPHICS BORDER REGISTER

• ANARKEY.COM - INSTALLATION CHECK

• ANARKEY.COM v2+
  • ???
  • ANARKEY.COM v2+ - GET ???

• ANARKEY.COM v3+
  • ???
  • ANARKMD API
  • ANARKEY.COM v3+ - ENABLE/SUSPEND ANARKEY

• ANARKEY.COM v4.0
  • GET ???
  • ANARKEY.COM v4.0 - GET ???

• Andy C. McGuire SPEECH.COM/SAY.COM
• Andy C. McGuire SPEECH.COM/SAY.COM
• ANSIPLUS v2.00+ - ANSIPLUS DEVICE STATUS REPORT
• ANSIPLUS v3.00+ - LOAD CHARACTER GENERATOR

• ANSIPLUS v3.01+
  • GET/SET ANSIPLUS SCREEN SAVER BLANKING TIME
  • ANSIPLUS v3.01+ - SET ANSIPLUS KEY REPEAT RATE

• ANSIPLUS v3.10+
  • GET ANSIPLUS SCROLLBACK INFORMATION
  • ANSIPLUS v3.10+ - GET NEXT ANSIPLUS SCROLLBACK LINE

• ANSIPLUS v4.00+
  • ENABLE/DISABLE ANSIPLUS DRIVER
  • ENABLE/DISABLE ANSIPLUS FEATURES
  • ANSIPLUS v4.00+ - GET/SET ANSIPLUS CLIPBOARD

• ANSIPLUS v4.02+ - GET/SET ANSIPLUS SMOOTH SCROLLING RATE
• ANSIPLUS v4.03+ - GET/SET ANSIPLUS INTERNAL VARIABLES
• ANSIPLUS.SYS v2.00+ - INSTALLATION CHECK

• APCAL v3.20
  • GET ???
  • GET ???
  • APCAL v3.20 - GET ???

• APL*PLUS/PC
  • ???
  • ???
  • ???
  • ???
  • ???
  • BEEP
  • BEEP
  • CLEAR SCREEN MEMORY
  • CLEAR SCREEN MEMORY
  • CREATE CHARACTER SCALAR/VECTOR/MATRIX <64K IN SIZE
  • CREATE FLOATING POINT SCALAR/VECTOR/MATRIX <64K IN SIZE
  • CREATE INTEGER SCALAR/VECTOR/MATRIX <64K IN SIZE
  • CREATE NAME
  • CREATE OBJECT OF ARBITRARY RANK OR SHAPE
  • DEFAULT LOW-RESOLUTION TIMER FOR QUAD MF FUNCTION
  • DETERMINE IF MEMORY AVAIL WITHOUT GARBAGE COLLECTION
  • DETERMINE NAME STATUS
  • DETERMINE NAME STATUS
  • DETERMINE R= SPACE
  • FORCE OBJECT INTO REAL WORKSPACE FROM VIRTUAL
  • IDENTICAL TO INT 86
  • IDENTICAL TO INT 88
  • MAKE NAME ELIGIBLE FOR OUTSWAPPING
  • MAKE NAME IMMUNE FROM OUTSWAPPING
  • PERFORM GARBAGE COLLECTION AND RETURN AVAILABLE MEMORY
  • PRINT SCREEN
  • PRINT SCREEN
  • REPORT WHETHER NAME IS ELIGIBLE FOR OUTSWAPPING
  • RESTIME HIGH-RESOLUTION TIMER FOR QUAD MF FUNCTION
  • SAME AS INT 10
  • Terminate APL session and return to DOS
  • USED BY APL/GSS*CGI GRAPHICS INTERFACE
  • APL*PLUS/PC - USED BY PORT 10 PRINTER DRIVER

• APM SL Enhanced v1.0
  • GET AUTO POWER OFF TIMER
  • GET CALENDAR EVENT DATE
  • GET CALENDAR EVENT TIME
  • GET CPU SPEED MODE
  • GET GLOBAL STANDBY TIMER
  • GET RESUME CONDITION
  • GET SUSPEND/GLOBAL STANDBY MODE
  • SET AUTO POWER OFF TIMER
  • SET CALENDAR EVENT DATE
  • SET CALENDAR EVENT TIME
  • SET CPU SPEED MODE
  • SET GLOBAL STANDBY TIMER
  • SET RESUME CONDITION
  • SET SUSPEND/GLOBAL STANDBY MODE
  • APM SL Enhanced v1.0 - SL HW PARAMETER

• APPC/PC
  • CHANGE LOGICAL UNIT
  • CHANGE NUMBER OF SESSIONS
  • CONNECTION CONTROL - ALLOCATE
  • CONNECTION CONTROL - CONFIRM
  • CONNECTION CONTROL - CONFIRMED
  • CONNECTION CONTROL - DEALLOCATE
  • CONNECTION CONTROL - FLUSH
  • CONNECTION CONTROL - GET ATTRIBUTES
  • CONNECTION CONTROL - GET CONVERSATION TYPE
  • CONNECTION CONTROL - POST ON RECEIPT
  • CONNECTION CONTROL - PREPARE TO RECEIVE
  • CONNECTION CONTROL - RECEIVE AND WAIT
  • CONNECTION CONTROL - RECEIVE IMMEDIATE
  • CONNECTION CONTROL - REQUEST TO SEND
  • CONNECTION CONTROL - SEND DATA
  • CONNECTION CONTROL - SEND ERROR
  • CONNECTION CONTROL - TEST
  • CONNECTION CONTROL - WAIT
  • CONVERT
  • ENABLE/DISABLE API VERB TRACING
  • ENABLE/DISABLE APPC
  • ENABLE/DISABLE MESSAGE TRACING
  • GET ALLOCATE
  • NETWORK DEVICE CONTROL - ACTIVATE DLC
  • NETWORK DEVICE CONTROL - ATTACH LOGICAL UNIT
  • NETWORK DEVICE CONTROL - ATTACH PHYSICAL UNIT
  • NETWORK DEVICE CONTROL - DETACH LOGICAL UNIT
  • NETWORK DEVICE CONTROL - DETACH PHYSICAL UNIT
  • NETWORK DEVICE CONTROL - DISPLAY
  • PASSTHROUGH
  • SET PASSTHROUGH
  • SET TRACE DESTINATION
  • TP STARTED
  • TRANSACTION PROCESSING
  • APPC/PC - TRANSFER MESSAGE DATA

• APPEND
  • GET VERSION
  • APPEND - INSTALLATION CHECK

• APPEND v3.21 only - GET APPEND PATH
• AQUEDUCT, PIPELINE - GET DATA AREA ADDRESS

• Arabic/Hebrew DOS 5.0???+
  • GET CURRENT FONTPAGE
  • Arabic/Hebrew DOS 5.0???+ - GET FONTPAGE STATUS???

• Arabic/Hebrew DOS 5.0???+ SET CURRENT FONTPAGE

• Arabic/Hebrew MS-DOS 5.0???+
  • HGC & HGC/RAMFont support???
  • Arabic/Hebrew MS-DOS 5.0???+ - INSTALLATION CHECK

• ARTICOM
  • ATTACH ASYNCHRONOUS RESOURCE
  • DETACH ASYNCHRONOUS RESOURCE
  • GET ASYNCHRONOUS REDIRECTOR STATUS
  • GET AVAILABLE SERVER NAME
  • GET INTERNAL SEND/RECEIVE VECTOR
  • GET REDIRECTED PORT INFORMATION
  • GET RESOURCE INFORMATION
  • INSTALLATION CHECK
  • MODIFY FLOW CONTROL
  • SET INTERNAL SEND/RECEIVE VECTOR
  • SET SEND AND RECEIVE TIMEOUTS
  • TRANSLATE ERROR CODE TO ERROR STRING
  • ARTICOM - UNLOAD ASYNCHRONOUS REDIRECTOR FROM MEMORY

• ASAP v1.0
  • ???
  • ASAP v1.0 - INSTALLATION CHECK

• ASM Edit - INSTALLATION CHECK
• ASPIHOOK.SYS - INSTALLATION CHECK

• AT&T 6300
  • READ TIME AND DATE
  • AT&T 6300 - SET TIME AND DATE

• AT&T Starlan Extended NetBIOS (var length names) - INSTALLATION CHECK
• AT&T Starlan Extended NetBIOS (variable length names)
• AT.COM version 8/26/87 - API

• AT/XT286/PS50+
  • destroyed by return from protected mode
  • AT/XT286/PS50+ - destroyed by return from protected mode

• ATA Software Programming Interface (ATASPI)
  • INSTALLATION CHECK
  • INTERFACE
  • ATA Software Programming Interface (ATASPI) - SEND ATASPI REQUEST

• ATALK.SYS - AppleTalk INTERFACE

• Atari Portfolio
  • DETERMINE CCM VALIDITY
  • DIAL NUMBER
  • ENABLE/DISABLE SYSTEM STATUS LINE
  • EXTENDED BIOS
  • FILE TRANSFER SERVICES
  • FORMAT CREDIT CARD MEMORY
  • FORMAT INTERNAL DISK
  • GET KEY/NMI-INVOKED SCREEN REFRESH
  • GET PERIPHERAL ID BYTE
  • GET SCREEN SIZE
  • GET SERIAL PORT PARAMETERS
  • GET SIZE OF INTERNAL DISK
  • GET VERSION
  • GET/SET CLOCK TICK SPEED
  • GET/SET CURSOR MODE
  • GET/SET INT 09 REVECTORING
  • GET/SET POWER CONTROL
  • GET/SET ROM/CCM SPACE STATE
  • GET/SET SCREEN MODE
  • GET/SET TEXT/KEYBOARD LANGUAGE
  • GET/SET VIRTUAL SCREEN POSITION
  • MELODY TONE GENERATOR
  • MOVE VIRTUAL SCREEN ORIGIN
  • MUTE STATES
  • PRESET/GET PERIPHERAL DATA
  • SCREEN REFRESH
  • SERVICE INITIALIZATION
  • SET PERIPHERAL ID BYTE
  • SOUND GENERATION
  • TURN SYSTEM OFF
  • Atari Portfolio - USER INTERFACE FUNCTIONS

• ATI BIOS Extensions - ???

• ATI M64VBE.COM
  • GET RESIDENT SEGMENT
  • INSTALLATION SIGNATURE
  • ATI M64VBE.COM - UNINSTALL

• ATI Mach64 BIOS
  • ???
  • ???
  • ???
  • ???
  • ???
  • ???
  • ???
  • ???
  • ???
  • GET ???
  • GET ???
  • GET ???
  • GET ???
  • GET ???
  • GET ???
  • GET ??? SIZE
  • GET SLEEP MODE
  • SET ???
  • ATI Mach64 BIOS - SET SLEEP MODE

• ATI Mouse - INSTALLATION CHECK

• ATI Rage128 BIOS
  • ???
  • ???
  • GET ???
  • GET/SET ???
  • ATI Rage128 BIOS - NOP

• Attachmate Extra!
  • DISABLE HOST BUFFER UPDATES
  • GET 3270 DISPLAY STATE
  • GET HOST WINDOW BUFFER ADDRESS
  • GET HOST WINDOW CURSOR POSITION
  • GET TRANSLATE TABLE ADDRESS
  • SEND KEYSTROKES TO HOST WINDOW
  • SET 3270 DISPLAY STATE
  • Attachmate Extra! - SET HOST WINDOW STATE

• AutoBraille v1.1A
  • ???
  • ???
  • ???
  • ???
  • CLEAR ??? FLAGS
  • GET ???
  • GET NEXT ???
  • INSTALLATION CHECK
  • SET ???
  • SET ???
  • SET ???
  • SET ???
  • SET ???
  • SET ???
  • SET ???
  • SET ???
  • AutoBraille v1.1A - SET ??? FLAGS

• AutoCAD Device Interface
  • Compaq VGADI41.EXE - GET ENTRY POINT
  • DIGITIZER - GET DIGITIZER STATUS
  • DIGITIZER - INITIALIZE
  • DIGITIZER - TERMINATE
  • DISPLAY - INITIALIZE (INIT1)
  • PLOTTER - SEND COMMAND
  • PRINTER/PLOTTER - ABORT PLOT
  • PRINTER/PLOTTER - BEGIN PLOT
  • PRINTER/PLOTTER - END PLOT
  • PRINTER/PLOTTER - SEND PLOTTING DATA
  • AutoCAD Device Interface - RENDERING DEVICE - INITIALIZE (RDLINKUP)

• AUTOPARK.COM
  • INSTALLATION CHECK
  • AUTOPARK.COM - SET PARKING DELAY

• AutoShade v2 - RENDERING HARDCOPY DRIVER
• Avance Logic - GET ADAPTER INFORMATION

• AVATAR Serial Dispatcher
  • INSTALL IRQ3 HANDLER
  • INSTALL IRQ4 HANDLER
  • UNINSTALL IRQ3 HANDLER
  • AVATAR Serial Dispatcher - UNINSTALL IRQ4 HANDLER

• AVATAR.SYS
  • FAST GET KEYSTROKE
  • INSTALLATION CHECK
  • QUERY DRIVER STATE
  • AVATAR.SYS - SET DRIVER STATE

• AVATAR.SYS v0.11
  • ???
  • ???
  • ???
  • ???
  • ???
  • ???
  • GET ???
  • AVATAR.SYS v0.11 - GET ??? SIZE

• AVATAR.SYS v0.11+ - GET DATA SEGMENT

• AX (Japanese AT) PRINTER
  • ENABLE/DISABLE CHARACTER CONVERSION
  • GET PRINTER COUNTRY CODE
  • JIS to Shift-JIS CONVERSION
  • OUTPUT CHARACTER WITHOUT CONVERSION
  • SET PRINTER COUNTRY CODE
  • AX (Japanese AT) PRINTER - Shift-JIS to JIS CONVERSION

Interrups

Categories

Contents

Shopping Forum EMail Index Home

Search the web with Google