Int 21/AX=F27Bh/SF=3Ch

Novell NetWare v4+ - GET SERVER SET COMMANDS INFO

AX = F27Bh subfn 3Ch
CX = length of request buffer in bytes
DX = length of reply buffer in bytes
DS:SI -> request buffer (see #02523)
ES:DI -> reply buffer (see #02524)

Return:
AL = status (see #02860 at INT 2F/AX=7A20h/BX=0000h)
reply buffer filled

Format of NetWare "Get Server Set Commands Info" request packet:

Offset  Size    Description     (Table 02523)
00h    WORD    0005h (length of following data)
02h    BYTE    3Ch (subfunction "Get Server Set Commands Info")
03h    DWORD   start sequence number

See Also: #02524

Format of NetWare "Get Server Set Commands Info" packet: Offset Size Description (Table 02524) 00h DWORD current server time 04h BYTE vconsole version 05h BYTE vconsole revision 06h WORD reserved 08h DWORD number of set commands 0Ch DWORD next sequence number 10h DWORD set command type 14h DWORD set command category 18h DWORD set command flags 1Ch BYTE length of set command name 1Dh N BYTEs set command name. BYTE number of set command values N BYTEs set command values

See Also: #02523

Category: Netware - Int 21h - N

Interrups Categories Contents

Shopping
Forum
EMail
Index
Home