|
| Interrups | Categories | Contents |
AH = xx (dynamically assigned based upon a search for a multiplex number from C0h to FFh which doesn't answer installed) AL = 00h installation check ES:DI = 1492h:1992h
Return:
AL = 00h not installed 01h not installed, not OK to install FFh installed; and if ES:DI was 1492h:1992h on entry, ES:DI will point to author_name_ver table (see #02588) AH = FFh
Note: This interface permits advanced communication with TSRs: it is possible to make a generic uninstall utility, advanced TSR relocator programs in order to fit fragmented memory areas, etc.
See also:
INT 2D"AMIS",INT 2F"Compuscience"Index:
Installation check;CiriSOFT TSR interfaceIndex:
Uninstall;CiriSOFT TSR interfaceFormat of CiriSOFT author_name_ver table: Offset Size Description (Table 02588) -16 WORD segment of the start of the resident TSR code (CS in programs with PSP, XMS upper memory segment if installed as UMB...) -14 WORD offset of the start of the resident TSR code (frequently 100h in *.COM programs and 0 in upper memory TSR's). -12 WORD memory used by TSR (in paragraphs). Knowing the memory area used by TSR is possible to determine if hooked vectors are still pointing it (and if it is safe to uninstall). -10 BYTE characteristics byte (see #02589) -9 BYTE number of multiplex entry used (redefinition available). Note that the TSR must use THIS variable in it's INT 2Fh handler. -8 WORD offset to vector_area table (see #02590) -6 WORD offset to extra_area table (see #02591,#02589 [bit 7]) -4 4 BYTEs signature string "*##*" 00h var "AUTHOR:PROGRAM_NAME:VERSION",0 (variable length, this area is used in order to determine if the TSR is already resident and it's version code; the ':' char is used as delimiter)
Bitfields for CiriSOFT characteristics byte: Bit(s) Description (Table 02589) 0-2 type. 000 normal program (with PSP). 001 upper XMS memory block (needed HIMEM.SYS function to free memory when uninstalling). 010 device driver (*.SYS). 011 device driver in EXE format. 1xx others (reserved) 3-6 reserved 7 set if extra_table defined and supported (see #02591)
See Also: #02588
Format of CiriSOFT vector_area table: Offset Size Description (Table 02590) -1 BYTE number of vectors intercepted by TSR 00h BYTE first vector number 01h DWORD first vector pointer before installing the TSR 05h BYTE second vector number 06h DWORD second vector pointer before installing the TSR 0Ah ... (and so on)
Note: The TSR must use these variables to invoke the previous interrupt handler routines
See Also: #02588
Format of extra_area table (needed only to improve relocation feature): Offset Size Description (Table 02591) 00h WORD offset to external_ctrl table (see #02592) 0000h if not supported 02h WORD reserved for future use (0)
See Also: #02588
Format of CiriSOFT external_ctrl table: Offset Size Description (Table 02592)
00h BYTE bit 0:
TSR is relocatable (no absolute segment references) 01h WORD offset to a variable which can activate/inhibit the TSR ---And if bit 0 in offset 00h is off: 03h DWORD pointer to ASCIZ pathname for executable file which supports /SR parameter (silent installation & inhibit) 07h DWORD pointer to first variable to initialize on the copy reloaded from the previous TSR still resident 0Bh DWORD pointer to last variable (all variables packed in one block)
Category: TSR Libraries - Int 2Fh - C
|
| Interrups | Categories | Contents |
|
