|
| Interrups | Categories | Contents |
AX = 0008h BX = selector CX:DX = segment limit
Return:
CF clear if successful CF set on error AX = error code (DPMI 1.0+) (8021h,8022h,8025h) (see #03143)
Notes: CX must be zero for 16-bit DPMI implementations. Limits greater than 1MB must be page aligned (low 12 bits set). Only modify descriptors allocated with INT 31/AX=0000h. DPMI 1.0+ automatically reloads any segment registers containing the selector being modified. Not supported by MS Windows 3.0 in Standard mode
See Also:
AX=0007h - AX=0009h - AX=000Ch - INT 21/AX=3505
See Also:
INT 2C/AX=0003h - #00501 at INT 15/AH=89h
Category:
DOS Extenders
-
Int 31h
-
D
|
| Interrups | Categories | Contents |
|
