Interrups

Categories

Contents

• Da Vinci eMail Dispatcher
  • BECOME MICRO TSR
  • INSTALLATION CHECK
  • IS ANYONE THERE? QUERY
  • NetChangePassword
  • NetCheckDriver
  • NetCheckQueue
  • NetClose
  • NetDeleteAltRoutes
  • NetErrorFix (UNUSED)
  • NetGetAltRoute
  • NetGetError
  • NetInitCheck
  • NetInitStart
  • NetOpen
  • NetRead
  • NetReadQueue
  • NetRemoveName
  • NetSetAltRoute
  • NetSubmitName
  • NetTerminate
  • NetWhereIs
  • Da Vinci eMail Dispatcher - NetWrite

• Da Vinci eMail Dispatcher INTERFACE
• DAISY.SYS - BROADCAST: CHAIN RESCANNED

• Data General DG10
  • MicroECLIPSE COPROCESSOR INTERFACE
  • MicroECLIPSE COPROCESSOR INTERFACE
  • Data General DG10 - MicroECLIPSE COPROCESSOR INTERFACE

• DATEFIX - INSTALLATION CHECK

• DBLSPACE.BIN
  • ActivateDrive - MOUNT COMPRESSED DRIVE
  • DBLSPACE/MRCI STEALTH PACKET API
  • DeactivateDrive - UNMOUNT COMPRESSED DRIVE
  • DSGetEntryPoints - GET DEVICE DRIVER ENTRY POINTS
  • DSSetEntryPoints - SET DEVICE DRIVER ENTRY POINTS
  • GET RELOCATION SIZE
  • GetDriveMapping - GET DRIVE MAPPING
  • GetDriveSpace - GET SPACE AVAIL ON COMPRESSED DRIVE
  • GetExtraInfo - DETERMINE NUMBER OF DISK_UNIT STRUCTS
  • GetFileFragmentSpace - GET SIZE OF FRAGMENT HEAP
  • GetVersion - INSTALLATION CHECK
  • IOCTL - FLUSH OR INVALIDATE INTERNAL CACHES
  • IOCTL - FLUSH OR INVALIDATE INTERNAL CACHES
  • RELOCATE
  • DBLSPACE.BIN - Swap Drive - SWAP DRIVE LETTERS OF CVF AND HOST DRIVE

• DBLSPACE.BIN v6.2
  • GET AUTOMOUNT DRIVES
  • IOCTL - GET ??? FOR SPECIFIED DRIVE
  • DBLSPACE.BIN v6.2 - SET AUTOMOUNT DRIVES

• DBOS DOS Extender
• DECnet DOS (before 2.1) - DATA LINK LAYER PROGRAM

• DECnet DOS
  • DECnet NETWORK PROCESS API
  • DECnet DOS - LOCAL AREA TRANSPORT PROGRAM - INSTALLATION CHECK

• DECnet DOS 2.1+ - DATA LINK LAYER

• DECnet DOS CTERM
  • CLOSE SESSION
  • DECnet STATUS
  • DEINSTALL CTERM
  • GET DECnet SOCKET
  • GET SESSION CONTROL BLOCK SIZE
  • INSTALLATION CHECK
  • OPEN SESSION
  • READ BYTE
  • SEND BYTE
  • DECnet DOS CTERM - STATUS

• DECnet DOS LOCAL AREA TRANSPORT
  • CLOSE SESSION
  • COPY LAT COUNTERS
  • GET NEXT LAT SERVICE NAME
  • LAT SERVICE TABLE RESET
  • OPEN SESSION
  • READ BYTE
  • RESET LAT COUNTERS
  • SEND BREAK
  • SEND BYTE
  • DECnet DOS LOCAL AREA TRANSPORT - STATUS

• DECnet DOS network scheduler

• DeskMate (Tandy)
  • DESK EXECUTIVE API
  • DeskMate (Tandy) - TASK DATA SEGMENTS (NOT A VECTOR!)

• DESQ??? - INSTALLATION CHECK
• DESQview (TopView???) - UNIMPLEMENTED IN DV 2.x

• DESQview
  • APPNUM - GET CURRENT PROGRAM'S NUMBER
  • GET ???
  • GET AVAILABLE COMMON MEMORY
  • GET AVAILABLE CONVENTIONAL MEMORY
  • GET AVAILABLE EXPANDED MEMORY
  • GET PROGRAM NAME
  • INSTALLATION CHECK
  • QEXT.SYS - INSTALLATION CHECK
  • UNIMPLEMENTED
  • DESQview - UPDATE OPEN WINDOW MENU

• DESQview 1.x only
  • GET ??? FOR CURRENT WINDOW
  • DESQview 1.x only - SET ??? FLAG FOR CURRENT WINDOW

• DESQview 2.20+
  • SEND MESSAGE - GETPRI - GET PRIORITY WITHIN OBJECTQ
  • DESQview 2.20+ - SEND MESSAGE - SETPRI - SET PRIORITY WITHIN OBJECTQ

• DESQview 2.42-2.53 - BUG

• DESQview 2.50+
  • SEND MESSAGE - GETNAME - GET NAME OF MAILBOX
  • DESQview 2.50+ - SEND MESSAGE - READINTO - GET NEXT MAIL MESSAGE

• DESQview v2.00+ (TopView???) - POSTTASK - AWAKEN TASK

• DESQview v2.00+
  • APILEVEL - DEFINE MINIMUM API LEVEL REQUIRED
  • DBGPOKE - DISPLAY CHARACTER ON STATUS LINE
  • ENABLE DESQview EXTENSIONS
  • FINDMAIL - FIND MAILBOX BY NAME
  • GETMEM - ALLOCATE SYSTEM MEMORY
  • JUSTIFY - EN/DISABLE AUTOM. WINDOW JUSTIFICATION
  • KMOUSE - KEYBOARD MOUSE CONTROL
  • NEWPROC - START NEW APPLICATION IN NEW PROCESS
  • PUSHKEY - PUT KEY INTO KEYBOARD INPUT STREAM
  • DESQview v2.00+ - PUTMEM - DEALLOCATE SYSTEM MEMORY

• DESQview v2.01+ - CSTYLE - SET C-COMPATIBLE CONTROL CHAR INTERPRET

• DESQview v2.20+
  • ASSERTMAP - GET/SET MAPPING CONTEXT
  • GET ERROR HANDLING
  • GET OBJECT TYPE
  • GETCRIT - GET CRITICAL NESTING COUNT
  • internal - ???
  • SEND MESSAGE - GETFLAGS - GET OBJECT FLAGS
  • SEND MESSAGE - SETFLAGS - SET OBJECT FLAGS
  • DESQview v2.20+ - SET ERROR HANDLING

• DESQview v2.20-2.25 - reserved

• DESQview v2.23+
  • DOSUSER - GET HANDLE OF TASK CURRENTLY USING DOS
  • ENTERC - INCREMENT CRITICAL NESTING COUNT
  • GETCOMMON - ALLOCATE COMMON MEMORY
  • PUTCOMMON - DEALLOCATE COMMON MEMORY
  • PUTKEY - FAKE USER KEYSTROKES
  • DESQview v2.23+ - SCRNINFO - GET TRUE VIDEO PARAMETERS

• DESQview v2.23+ internal - DECREMENT CRITICAL NESTING COUNT

• DESQview v2.26+
  • ASSERTMAP - GET/SET MAPPING CONTEXT
  • ASSERTVIR - CONTROL 386 SCREEN VIRTUALIZATION
  • CONNECT - CONNECT TWO WINDOWS
  • DISPATCHINT - INTERRUPT ANOTHER TASK
  • DESQview v2.26+ - PROCESSMEM - GET TASK MEMORY STATUS

• DESQview v2.26+ External Dev Interface
  • ADD PROCESS
  • CHANGE KEYBOARD FOCUS
  • CREATE TASK
  • DV INITIALIZATION COMPLETE
  • DV TERMINATION
  • DVP PROCESSING COMPLETE
  • DVP START FAILED
  • REMOVE PROCESS
  • RESTORE STATE
  • SAVE STATE
  • SWAP IN PROCESS
  • SWAP OUT PROCESS
  • DESQview v2.26+ External Dev Interface - TERMINATE TASK

• DESQview v2.26+ External Device Interface
  • DRIVER CUSTOM SUBFUNCTION
  • DESQview v2.26+ External Device Interface - INSTALLATION CHECK

• DESQview v2.26+ XDI
  • CUSTOM SUBFUNCTION, DVSIXDI.COM
  • CUSTOM SUBFUNCTION, DVTXDI.COM
  • CUSTOM SUBFUNCTION, Ralf Brown's XDI drivers
  • DESQview v2.26+ XDI - DVXMS.DVR - ???

• DESQview v2.31+ - ???

• DESQview v2.40+
  • ALLOCATE SYSTEM MEMORY
  • GETDVPATH - GET DESQview DIRECTORY
  • GETFOREGROUND - GET KEYBOARD FOCUS
  • DESQview v2.40+ - XNEWPROC - START NEW APPLICATION

• DESQview v2.42-2.52 - BUG

• DESQview v2.50+
  • ???
  • ADDINSTANCEDATA - ADD PER-TASK SAVE/RESTORE AREA
  • DISPATCHINTAFTERDOS - INTERRUPT ANOTHER TASK
  • GET/SET SOCKET HANDLER
  • GETDVXVERSION - GET DESQview/X VERSION
  • OBJNEXT - TRAVERSE OBJECT LIST
  • SEND MESSAGE 00h WITH ERROR RECOVERY
  • SEND MESSAGE 01h WITH ERROR RECOVERY
  • SEND MESSAGE 02h WITH ERROR RECOVERY
  • SEND MESSAGE 03h WITH ERROR RECOVERY
  • SEND MESSAGE 04h WITH ERROR RECOVERY
  • SEND MESSAGE 05h WITH ERROR RECOVERY
  • SEND MESSAGE 06h WITH ERROR RECOVERY
  • SEND MESSAGE 07h WITH ERROR RECOVERY
  • SEND MESSAGE 08h WITH ERROR RECOVERY
  • SEND MESSAGE 09h WITH ERROR RECOVERY
  • SEND MESSAGE 0Ah WITH ERROR RECOVERY
  • SEND MESSAGE 0Bh WITH ERROR RECOVERY
  • SEND MESSAGE 0Ch WITH ERROR RECOVERY
  • SEND MESSAGE 0Dh WITH ERROR RECOVERY
  • SEND MESSAGE 0Eh WITH ERROR RECOVERY
  • SEND MESSAGE 0Fh WITH ERROR RECOVERY
  • SEND MESSAGE 10h WITH ERROR RECOVERY
  • SEND MESSAGE 11h WITH ERROR RECOVERY
  • SEND MESSAGE 12h WITH ERROR RECOVERY
  • SEND MESSAGE 13h WITH ERROR RECOVERY
  • SEND MESSAGE 14h WITH ERROR RECOVERY
  • SEND MESSAGE 15h WITH ERROR RECOVERY
  • SEND MESSAGE 16h WITH ERROR RECOVERY
  • SOCKET API
  • VIDEONOTIFY - HAS DIRECT WINDOW BEEN ACTIVE?
  • DESQview v2.50+ - WININFO - GET WINDOW INFORMATION

• DESQview v2.50+ External Dev Interface
  • FREE TASK
  • DESQview v2.50+ External Dev Interface - INITIALIZE DV

• DESQview/X
  • ???
  • ???
  • ???
  • ???
  • ???
  • ???
  • DVDOS4GX.DVR - INSTALLATION CHECK
  • GET DISPLAY NAME
  • DESQview/X - SOCKET API

• DESQview/X 1.02+
  • DVDOS4GX.DVR - ???
  • DVDOS4GX.DVR - ???
  • DVDOS4GX.DVR - ???
  • DVDOS4GX.DVR - ???
  • DVDOS4GX.DVR - ???
  • DVDOS4GX.DVR - ???
  • DVDOS4GX.DVR - ???
  • DVDOS4GX.DVR - CHECK IF ??? MAILBOX OWNED
  • DVDOS4GX.DVR - DECREMENT ???
  • DVDOS4GX.DVR - GET ???
  • DVDOS4GX.DVR - GET ???
  • DVDOS4GX.DVR - GET ???
  • DVDOS4GX.DVR - GET ???
  • DVDOS4GX.DVR - GET ???
  • DVDOS4GX.DVR - GET ???
  • DVDOS4GX.DVR - GET ??? MAILBOX OWNER
  • DVDOS4GX.DVR - GET PROCESS MANAGER NAME
  • DVDOS4GX.DVR - GET PROTECTED MODE PROGRAM LOADER
  • DVDOS4GX.DVR - GET TASK HANDLE
  • DVDOS4GX.DVR - INCREMENT ???
  • DVDOS4GX.DVR - LOCK ??? MAILBOX
  • DVDOS4GX.DVR - NOP
  • DVDOS4GX.DVR - SET ???
  • DVDOS4GX.DVR - SET ???
  • DVDOS4GX.DVR - SET ???
  • DESQview/X 1.02+ - DVDOS4GX.DVR - UNLOCK ??? MAILBOX

• DESQview/X v1.10 - ???
• DGIS - INQUIRE INT 10 OUTPUT DEVICE

• Diamond Stealth 24
  • GET LINEAR ADDRESS
  • GET S3 INFORMATION BLOCK
  • SET LINEAR ADDRESS
  • Diamond Stealth 24 - SET/RESET DUAL DISPLAY MODE

• Diamond Stealth64 Video
  • DMSSTL.DRV - ???
  • INSTALLATION CHECK
  • STLTH64.VXD - ???
  • STLTH64.VXD - ???
  • Diamond Stealth64 Video - STLTH64.VXD - ???

• Diamond Viper V330 - ???
• Diet Disk v1.0 - INSTALLATION CHECK

• DIET v1.10+ (Overlay Mode)
  • EXPAND PROGRAM???
  • DIET v1.10+ (Overlay Mode) - INSTALLATION CHECK

• DIET v1.43e
  • GET DIET.EXE RESIDENT SEGMENT
  • GET TEMPORARY DIRECTORY NAMES
  • GET TSR CONTROL FLAGS
  • GET TSR OPTIONS
  • READ EMS STATUS
  • RELEASE EXTERNAL PROCEDURE
  • SET ADDRESS OF EXTERNAL PROCEDURE
  • SET TEMPORARY DIRECTORY NAMES
  • SET TSR CONTROL FLAGS
  • SET TSR OPTIONS
  • TSR INSTALLATION CHECK
  • DIET v1.43e - UNINSTALL TSR

• Digiboard
  • CCB COMMAND - BUFFER SET ALL
  • CCB COMMAND - IRQ POLLING TIMER TO HOST
  • CCB COMMAND - SET BAUD/DATABITS/STOPBITS/PARITY
  • CCB COMMAND - SET BREAK COUNT
  • CCB COMMAND - SET HANDSHAKE
  • CCB COMMAND - SET INTERRUPT TO HOST MASK
  • CCB COMMAND - SET MODEM LINES
  • CCB COMMAND - SET TRANSMIT MID-WATER MARK
  • CCB COMMAND - SET XON/XOFF CHARACTERS
  • CCB COMMAND - SPECIAL CHARACTER INTERRUPT
  • ENABLE/DISABLE MEMORY
  • Digiboard - GET NUMBER OF BOARDS INSTALLED

• Digiboard DigiCHANNEL PC/X - SPECIAL CHARACTER FLAG/COUNTER

• Digiboard DigiCHANNEL PC/X*
  • ALTERNATE STATUS CHECK
  • CCB COMMAND
  • CHANGE BAUD RATE
  • CHANGE PROTOCOL
  • CLEAR BUFFERS
  • CLEAR RECEIVE BUFFER
  • CLEAR TRANSMIT BUFFER
  • GET POINTER TO CH_KEY_RDY FLAG
  • GET TRANSMIT BUFFER FREE SPACE
  • INPUT QUEUE CHECK
  • READ STRING
  • SEND BIOS COMMAND
  • SPECIAL CHARACTER INTERRUPT
  • Digiboard DigiCHANNEL PC/X* - WRITE STRING

• DIGITAL RESEARCH
  • FIDDS INTERRUPT
  • DIGITAL RESEARCH - FLAG INTERRUPT

• Digital Research DOS Plus - CALL BDOS

• DIGPAK
  • GET ADDRESSES
  • GET AUDIO PENDING STATUS
  • PLAY PREFORMATTED DATA
  • POST AUDIO PENDING
  • REPORT DMA COUNTER
  • SET DMA BACKFILL MODE
  • SET DPMI MODE
  • SET PCM VOLUME
  • SET PLAY MODE
  • SET RECORD MODE
  • SET STEREO PANNING
  • SET TIMER DIVISOR RATE
  • STOP NEXT LOOP
  • DIGPAK - VERIFY DMA BLOCK

• DimVGA v2.0+
  • CHECK WHETHER ENABLED
  • DIM SCREEN 'MANUALLY'
  • DISABLE
  • ENABLE
  • GET DIMMING FACTOR
  • GET TIME-OUT PERIOD
  • INSTALLATION CHECK
  • SET DIMMING FACTOR
  • SET TIME-OUT (DIMMING/BLANKING) PERIOD
  • DimVGA v2.0+ - UNDIM SCREEN 'MANUALLY'

• DimVGA v2.1+
  • GET HOTKEY
  • DimVGA v2.1+ - SET HOTKEY

• DimVGA v3.0+
  • GET MOUSE CHECK STATUS
  • DimVGA v3.0+ - SET MOUSE CHECK STATUS

• DimVGA v3.4
  • GET MOUSE CHECK STATUS
  • DimVGA v3.4 - SET LOCKING STATUS

• DIMWIT
  • GET CONFIGURATION DATA
  • DIMWIT - INSTALLATION CHECK

• Direct Graphics Interface Standard (DGIS)
  • INQUIRE AVAILABLE DEVICES
  • Direct Graphics Interface Standard (DGIS) - REDIRECT CHARACTER OUTPUT

• DISK
  • ??? (Western Digital Super BIOS)
  • GET DISK TYPE (XT 1986/1/10 or later,XT286,AT,PS)
  • GET DRIVE PARAMETERS (PC,XT286,CONV,PS,ESDI,SCSI)
  • GET STATUS OF LAST OPERATION
  • READ SECTOR(S) INTO MEMORY
  • RESET DISK SYSTEM
  • SET MEDIA TYPE FOR FORMAT (AT model 3x9,XT2,XT286,PS)
  • VERIFY DISK SECTOR(S)
  • DISK - WRITE DISK SECTOR(S)

• Disk Spool II v1.83
  • FUNCTION CALLS
  • INSTALLATION CHECK
  • Disk Spool II v1.83 - INSTALLATION CHECK

• Disk Spool II v2.07+
  • ALTERNATE INSTALLATION CHECK
  • FUNCTION CALLS
  • Disk Spool II v2.07+ - INSTALLATION CHECK

• Disk Spool II v4.05 - ???

• Disk Spool II v4.0x
  • ENABLE/DISABLE
  • GET SPOOL FILE STATUS
  • GET SPOOL FILES
  • GET STATUS
  • SPOOL EXISTING FILE
  • SPOOL EXISTING FILE???
  • Disk Spool II v4.0x - UPDATE SPOOL FILE

• Disk-Emu - INSTALLATION CHECK / GET VERSION
• DISKETTE - ROM BIOS DISKETTE HANDLER RELOCATED BY HARD DISK BIOS
• DISKLESS BOOT HOOK (START CASSETTE BASIC)

• DJ GO32.EXE 80386+ DOS extender
  • DOS EXTENSIONS
  • DJ GO32.EXE 80386+ DOS extender - VIDEO EXTENSIONS

• DJGPP GO32.EXE DOS EXTENDER
  • RELOCATED IRQ0
  • RELOCATED IRQ1
  • RELOCATED IRQ2
  • RELOCATED IRQ3
  • RELOCATED IRQ4
  • RELOCATED IRQ5
  • RELOCATED IRQ6
  • DJGPP GO32.EXE DOS EXTENDER - RELOCATED IRQ7

• DK.COM v1.03 - INSTALLATION CHECK

• DLite 1.0+
  • CHECK FOR dPressed FILE AND GET COMPRESSED SIZE
  • CHECK FOR dPressed FILE AND GET ORIGINAL SIZE
  • DLite 1.0+ - GET PARAMETER BLOCK ADDRESS

• DMP Print Spooler v2.03 - INSTALLATION CHECK
• Doorway - SET BIOS/DIRECT REDIRECTION
• Doorway v2.x+ - INSTALLATION CHECK / REDIRECTION CONTROLa

• DOS 1+
  • ABSOLUTE DISK READ (except partitions > 32M)
  • BUFFERED INPUT
  • CHARACTER INPUT WITHOUT ECHO
  • CLOSE FILE USING FCB
  • CONTROL-C/CONTROL-BREAK HANDLER
  • CREATE NEW PROGRAM SEGMENT PREFIX
  • CREATE OR TRUNCATE FILE USING FCB
  • CRITICAL ERROR HANDLER
  • DELETE FILE USING FCB
  • DIRECT CHARACTER INPUT, WITHOUT ECHO
  • DIRECT CONSOLE INPUT
  • DIRECT CONSOLE OUTPUT
  • DISK RESET
  • FIND FIRST MATCHING FILE USING FCB
  • FIND NEXT MATCHING FILE USING FCB
  • FLUSH BUFFER AND READ STANDARD INPUT
  • GET ALLOCATION INFORMATION FOR DEFAULT DRIVE
  • GET ALLOCATION INFORMATION FOR SPECIFIC DRIVE
  • GET CURRENT DEFAULT DRIVE
  • GET DRIVE PARAMETER BLOCK FOR DEFAULT DRIVE
  • GET FILE SIZE FOR FCB
  • GET STDIN STATUS
  • GET SYSTEM DATE
  • GET SYSTEM TIME
  • NULL FUNCTION FOR CP/M COMPATIBILITY
  • NULL FUNCTION FOR CP/M COMPATIBILITY
  • NULL FUNCTION FOR CP/M COMPATIBILITY
  • NULL FUNCTION FOR CP/M COMPATIBILITY
  • OPEN FILE USING FCB
  • PARSE FILENAME INTO FCB
  • PROGRAM TERMINATION ADDRESS
  • RANDOM BLOCK READ FROM FCB FILE
  • RANDOM BLOCK WRITE TO FCB FILE
  • READ CHARACTER FROM STANDARD INPUT, WITH ECHO
  • READ CHARACTER FROM STDAUX
  • READ RANDOM RECORD FROM FCB FILE
  • RENAME FILE USING FCB
  • SELECT DEFAULT DRIVE
  • SEQUENTIAL READ FROM FCB FILE
  • SEQUENTIAL WRITE TO FCB FILE
  • SET DISK TRANSFER AREA ADDRESS
  • SET INTERRUPT VECTOR
  • SET RANDOM RECORD NUMBER FOR FCB
  • SET SYSTEM DATE
  • SET SYSTEM TIME
  • SET VERIFY FLAG
  • TERMINATE AND STAY RESIDENT
  • TERMINATE PROGRAM
  • TERMINATE PROGRAM
  • WRITE CHARACTER TO PRINTER
  • WRITE CHARACTER TO STANDARD OUTPUT
  • WRITE CHARACTER TO STDAUX
  • WRITE RANDOM RECORD TO FCB FILE
  • DOS 1+ - WRITE STRING TO STANDARD OUTPUT

• DOS 2+
  • ALLOCATE MEMORY
  • CHDIR - SET CURRENT DIRECTORY
  • CHMOD - SET FILE ATTRIBUTES
  • CLOSE - CLOSE FILE
  • CREAT - CREATE OR TRUNCATE FILE
  • CWD - GET CURRENT DIRECTORY
  • DOS IDLE INTERRUPT
  • DUP - DUPLICATE FILE HANDLE
  • DUP2, FORCEDUP - FORCE DUPLICATE FILE HANDLE
  • EXEC - LOAD AND/OR EXECUTE PROGRAM
  • EXIT - TERMINATE WITH RETURN CODE
  • EXTENDED BREAK CHECKING
  • FAST CONSOLE OUTPUT
  • FINDFIRST - FIND FIRST MATCHING FILE
  • FINDNEXT - FIND NEXT MATCHING FILE
  • FREE MEMORY
  • GET ADDRESS OF INDOS FLAG
  • GET COUNTRY-SPECIFIC INFORMATION
  • GET DISK TRANSFER AREA ADDRESS
  • GET DOS DRIVE PARAMETER BLOCK FOR SPECIFIC DRIVE
  • GET DOS VERSION
  • GET FILE ATTRIBUTES
  • GET FILE'S LAST-WRITTEN DATE AND TIME
  • GET FREE DISK SPACE
  • GET INTERRUPT VECTOR
  • GET RETURN CODE (ERRORLEVEL)
  • GET VERIFY FLAG
  • IOCTL - GET INPUT STATUS
  • IOCTL - GET OUTPUT STATUS
  • IOCTL - READ FROM BLOCK DEVICE CONTROL CHANNEL
  • IOCTL - READ FROM CHARACTER DEVICE CONTROL CHANNEL
  • IOCTL - SET DEVICE INFORMATION
  • IOCTL - WRITE TO BLOCK DEVICE CONTROL CHANNEL
  • IOCTL - WRITE TO CHARACTER DEVICE CONTROL CHANNEL
  • LSEEK - SET CURRENT FILE POSITION
  • MKDIR - CREATE SUBDIRECTORY
  • OPEN - OPEN EXISTING FILE
  • PASS COMMAND TO COMMAND INTERPRETER FOR EXECUTION
  • READ - READ FROM FILE OR DEVICE
  • RENAME - RENAME FILE
  • RESERVED
  • RESERVED
  • RESERVED
  • RESIZE MEMORY BLOCK
  • RMDIR - REMOVE SUBDIRECTORY
  • SET FILE'S LAST-WRITTEN DATE AND TIME
  • SWITCHAR - GET SWITCH CHARACTER
  • SWITCHAR - SET SWITCH CHARACTER
  • TERMINATE AND STAY RESIDENT
  • UNLINK - DELETE FILE
  • DOS 2+ - WRITE - WRITE TO FILE OR DEVICE

• DOS 2+ internal
  • CREATE CHILD PSP
  • GET CURRENT PROCESS ID (GET PSP ADDRESS)
  • SET CURRENT PROCESS ID (SET PSP ADDRESS)
  • SYSVARS - GET LIST OF LISTS
  • DOS 2+ internal - TRANSLATE BIOS PARAMETER BLOCK TO DRIVE PARAM BLOCK

• DOS 2.11+ - GET OR SET MEMORY ALLOCATION STRATEGY
• DOS 2.25 only - GET LEAD BYTE TABLE ADDRESS

• DOS 2.25, DOS 3.2+
  • GET KOREAN (HANGEUL) INPUT MODE
  • DOS 2.25, DOS 3.2+ - SET KOREAN (HANGEUL) INPUT MODE

• DOS 2.x and 3.3+ only - AVAILDEV - SPECIFY \DEV\ PREFIX USE

• DOS 2.x only PRINT.COM
  • REMOVE FILE FROM PRINT QUEUE
  • DOS 2.x only PRINT.COM - SUBMIT FILE FOR PRINTING

• DOS 3.0+
  • CREATE NEW FILE
  • CREATE TEMPORARY FILE
  • FLOCK - RECORD LOCKING
  • GET CURRENT PSP ADDRESS
  • GET EXTENDED ERROR INFORMATION
  • IOCTL - CHECK IF BLOCK DEVICE REMOVABLE
  • SET COUNTRY CODE
  • TRUENAME - CANONICALIZE FILENAME OR PATH
  • DOS 3.0+ - UNUSED (RESERVED FOR NETWORK USE)

• DOS 3.0+ ASSIGN
  • GET DRIVE ASSIGNMENT TABLE
  • DOS 3.0+ ASSIGN - INSTALLATION CHECK

• DOS 3.0+ CRITICAL ERROR HANDLER
  • EXPAND ERROR INTO STRING
  • DOS 3.0+ CRITICAL ERROR HANDLER - INSTALLATION CHECK

• DOS 3.0+ internal
  • BUILD CURRENT DIRECTORY STRUCTURE
  • CANONICALIZE FILE NAME
  • CHECK IF CHARACTER DEVICE
  • CHECKSUM MEMORY
  • CLOSE CURRENT FILE
  • COMPARE FAR POINTERS
  • COMPARE FILENAMES
  • DECREMENT SFT REFERENCE COUNT
  • FIND UNREFERENCED DISK BUFFER
  • FLUSH AND FREE DISK BUFFER
  • FLUSH BUFFER
  • GET ADDRESS OF DOS SWAPPABLE DATA AREA
  • GET ADDRESS OF SYSTEM FILE TABLE ENTRY
  • GET CALLER'S REGISTERS
  • GET CURRENT DIRECTORY STRUCTURE FOR DRIVE
  • GET DATE AND TIME
  • GET DOS DATA SEGMENT
  • GET FILE'S DRIVE
  • GET INTERRUPT ADDRESS
  • GET JOB FILE TABLE ENTRY
  • GET LENGTH OF ASCIZ STRING
  • GET LENGTH OF ASCIZ STRING
  • INSTALLATION CHECK
  • INVOKE CRITICAL ERROR
  • MAKE BUFFER MOST RECENTLY USED
  • MAKE DISK BUFFER MOST-RECENTLY USED
  • MARK ALL DISK BUFFERS UNREFERENCED
  • NORMALIZE ASCIZ FILENAME
  • NORMALIZE PATH SEPARATOR
  • OPEN DEVICE AND SET SFT OWNER/MODE
  • OUTPUT CHARACTER TO STANDARD OUTPUT
  • PERFORM CRITICAL ERROR INTERRUPT
  • SET DRIVE???
  • SET EXTENDED ERROR INFO
  • SET YEAR/LENGTH OF FEBRUARY
  • SHARING RETRY DELAY
  • SIGNAL SHARING VIOLATION TO USER
  • SUM MEMORY
  • DOS 3.0+ internal - UPPERCASE CHARACTER

• DOS 3.0+ PRINT
  • CANCEL ALL FILES IN PRINT QUEUE
  • FREEZE PRINT QUEUE TO READ JOB STATUS
  • INSTALLATION CHECK
  • REMOVE FILE FROM PRINT QUEUE
  • RESTART PRINT QUEUE AFTER STATUS READ
  • DOS 3.0+ PRINT - SUBMIT FILE FOR PRINTING

• DOS 3.0+ PRINT.COM
  • DISABLE CRITICAL REGION FLAG
  • DOS 3.0+ PRINT.COM - SET CRITICAL REGION FLAG

• DOS 3.1+
  • IOCTL - CHECK IF BLOCK DEVICE REMOTE
  • IOCTL - CHECK IF HANDLE IS REMOTE
  • IOCTL - SET SHARING RETRY COUNT
  • DOS 3.1+ - SET EXTENDED ERROR INFORMATION

• DOS 3.1+ internal
  • COMMIT ALL FILES FOR SPECIFIED COMPUTER/PROCESS
  • SERVER FUNCTION CALL
  • SHARE.EXE - CLOSE ALL FILES FOR GIVEN COMPUTER
  • SHARE.EXE - CLOSE ALL FILES FOR GIVEN PROCESS
  • SHARE.EXE - CLOSE FILE BY NAME
  • DOS 3.1+ internal - SHARE.EXE - GET OPEN FILE LIST ENTRY

• DOS 3.1+ network
  • CANCEL REDIRECTION
  • FLUSH REDIRECTED PRINTER OUTPUT
  • GET NETWORK PRINTER SETUP STRING
  • GET PRINTER MODE
  • GET REDIRECTED PRINTER MODE
  • GET REDIRECTION LIST ENTRY
  • GET REDIRECTION MODE
  • REDIRECT DEVICE
  • SET MACHINE NAME
  • SET NETWORK PRINTER SETUP STRING
  • SET PRINTER MODE
  • SET REDIRECTED PRINTER MODE
  • DOS 3.1+ network - SET REDIRECTION MODE

• DOS 3.1+ PRINT - GIVE PRINT A TIME SLICE
• DOS 3.2 Realtime Clock update

• DOS 3.2+
  • GET DOUBLE BYTE CHARACTER SET LEAD-BYTE TABLE
  • IOCTL - GENERIC BLOCK DEVICE REQUEST
  • IOCTL - GENERIC CHARACTER DEVICE REQUEST
  • IOCTL - GET LOGICAL DRIVE MAP
  • IOCTL - SET LOGICAL DRIVE MAP
  • DOS 3.2+ - SET DISK INTERRUPT HANDLER

• DOS 3.2+ internal - SET DEVICE DRIVER LOOKAHEAD FLAG

• DOS 3.3+
  • FFLUSH - COMMIT FILE
  • GET EXTENDED COUNTRY INFORMATION
  • GET GLOBAL CODE PAGE TABLE
  • SET GLOBAL CODE PAGE TABLE
  • DOS 3.3+ - SET HANDLE COUNT

• DOS 3.3+ APPEND
  • GET APPEND PATH
  • DOS 3.3+ APPEND - GET VERSION INFO

• DOS 3.3+ DISPLAY.SYS internal
  • GET ACTIVE CODE PAGE
  • GET CODE PAGE INFORMATION
  • INSTALLATION CHECK
  • DOS 3.3+ DISPLAY.SYS internal - SET ACTIVE CODE PAGE

• DOS 3.3+ GRAFTABL.COM
  • GET GRAPHICS FONT TABLE
  • DOS 3.3+ GRAFTABL.COM - INSTALLATION CHECK

• DOS 3.3+ internal
  • CLOSE FILE
  • GET DEVICE CHAIN
  • GET EXTENDED ERROR CODE
  • INSTALLABLE COMMAND - EXECUTE
  • INSTALLABLE COMMAND - INSTALLATION CHECK
  • IOCTL
  • MOVE FILE POINTER
  • OPEN FILE
  • READ FROM FILE
  • DOS 3.3+ internal - SET FASTOPEN ENTRY POINT

• DOS 3.3+ KEYB.COM
  • SET KEYBOARD CODE PAGE
  • DOS 3.3+ KEYB.COM - SET KEYBOARD MAPPING

• DOS 3.3+ PRINT - GET PRINTER DEVICE
• DOS 3.3, DOS 5.0 APPEND - HOOK INT 21

• DOS 3.31+
  • ABSOLUTE DISK READ (32M-2047M hard-disk partition)
  • DOS 3.31+ - ABSOLUTE DISK WRITE (32M-2047M hard-disk partition)

• DOS 3.4/4.0
  • GET CURRENT CPSW STATE
  • DOS 3.4/4.0 - SET CPSW STATE

• DOS 3.x+ internal - GET AND SET EXTENDED CONTROL-BREAK CHECKING STATE

• DOS 4 only SHARE internal
  • ???
  • TURN OFF FILE SHARING CHECKS
  • DOS 4 only SHARE internal - TURN ON FILE SHARING CHECKS

• DOS 4+ XMA2EMS.SYS extension internal
  • GET HIDDEN FRAME INFORMATION
  • DOS 4+ XMA2EMS.SYS extension internal - INSTALLATION CHECK

• DOS 4.0 internal - IFS IOCTL

• DOS 4.0+
  • ???
  • COMMIT FILE
  • COUNTRY-DEPENDENT CHARACTER CAPITALIZATION
  • DETERMINE IF CHARACTER REPRESENTS YES/NO RESPONSE
  • EXTENDED OPEN/CREATE
  • DOS 4.0+ - GET BOOT DRIVE

• DOS 4.0+ ANSI.SYS - INSTALLATION CHECK

• DOS 4.0+ ANSI.SYS internal
  • GET/SET DISPLAY INFORMATION
  • DOS 4.0+ ANSI.SYS internal - MISCELLANEOUS REQUESTS

• DOS 4.0+ APPEND
  • GET APPEND FUNCTION STATE
  • SET APPEND FUNCTION STATE
  • DOS 4.0+ APPEND - SET RETURN FOUND NAME STATE

• DOS 4.0+ DRIVER.SYS support - GET DRIVE DATA TABLE LIST

• DOS 4.0+ internal
  • COUNTRY-DEPENDENT FILENAME CAPITALIZATION
  • GET OR SET ERROR TABLE ADDRESSES
  • DOS 4.0+ internal - GET/SET DISK SERIAL NUMBER

• DOS 4.0+ network - GET EXTENDED REDIRECTION LIST ENTRY
• DOS 4.0+ SELECT - DISPLAY FORMAT DISK PROMPT
• DOS 4.00 GRAPHICS.COM - INSTALLATION CHECK
• DOS 4.01+ GRAPHICS.COM - INSTALLATION CHECK
• DOS 4.x DISPLAY.SYS internal - INSTALLATION CHECK???
• DOS 4.x internal - SET DOS VERSION NUMBER TO RETURN

• DOS 4.x only
  • GET EXTENDED ATTRIBUTE PROPERTIES
  • GET EXTENDED ATTRIBUTES FOR FILE
  • internal - GET DOS SWAPPABLE DATA AREAS
  • DOS 4.x only - SET EXTENDED ATTRIBUTES

• DOS 4.x only DISPLAY.SYS internal - ???

• DOS 4.x only SHELLB.COM
  • COMMAND.COM interface
  • COMMAND.COM INTERFACE
  • INSTALLATION CHECK
  • SHELLB transient to TSR interface
  • DOS 4.x only SHELLB.COM - SHELLC.EXE INTERFACE

• DOS 5+
  • ALLOCATE HMA SPACE
  • COMMAND.COM INTERFACE
  • DISABLE DRIVE
  • DOS SUPERVISOR REBOOT PANEL - ADJUST MEMORY SIZE
  • ENABLE DRIVE
  • FLOPPY-DISK LOGICAL DRIVE CHANGE NOTIFICATION
  • GET OR SET UMB LINK STATE
  • GET TRUE VERSION NUMBER
  • IOCTL - QUERY GENERIC IOCTL CAPABILITY (DRIVE)
  • IOCTL - QUERY GENERIC IOCTL CAPABILITY (HANDLE)
  • NULL FUNCTION
  • QUERY FREE HMA SPACE
  • ROM COMMAND.COM INTERFACE
  • DOS 5+ - SET EXECUTION STATE

• DOS 5+ DISPLAY.SYS internal - ???
• DOS 5+ DOSKEY - INSTALLATION CHECK
• DOS 5+ DOSKEY, PCED v2.1 - READ INPUT LINE FROM CONSOLE
• DOS 5+ DOSSHELL - TASK SWITCHING API???
• DOS 5+ KEYB.COM - GET KEYBOARD MAPPING

• DOS 5+ ROM
  • FIND FIRST ROM PROGRAM
  • FIND NEXT ROM PROGRAM
  • GET EXCLUSION REGION LIST
  • GET ROM SCAN START ADDRESS
  • SET EXCLUSION REGION LIST
  • DOS 5+ ROM - SET ROM SCAN START ADDRESS

• DOS 5+ TASK SWITCHER
  • ALLOCATE SWITCHER ID
  • BUILD CALLOUT CHAIN
  • FREE SWITCHER ID
  • IDENTIFY INSTANCE DATA
  • DOS 5+ TASK SWITCHER - INSTALLATION CHECK

• DOS 5.0+ SETUP

• DOS Enhanced LAN Manager 2.0+ MINIPOP/NETPOPUP
  • ???
  • ???
  • DOS Enhanced LAN Manager 2.0+ MINIPOP/NETPOPUP - INSTALLATION CHECK

• DOS EXTENDER INSTALLATION CHECK
• DOS Extender support???

• DOS LAN Requester
  • GET START PARAMETERS
  • DOS LAN Requester - GET XSI2 ADDRESS / DATA

• DOS Navigator II
  • INSTALLATION CHECK
  • RETURN POINTER TO COMMAND LINE
  • SET 'TRUE' EXIT CODE OF DN.PRG
  • DOS Navigator II - SPECIFY HOW TO EXECUTE COMMANDS

• DOS Navigator II v1.49
  • GET ???
  • GET ???
  • DOS Navigator II v1.49 - SET ???

• DOS Protected Mode Services (DPMS) v1.0
  • DPMS EXIT BROADCAST
  • DPMS STARTUP BROADCAST
  • ENABLE/DISABLE DPMS
  • INSTALLATION CHECK
  • DOS Protected Mode Services (DPMS) v1.0 - REGISTER CLIENT

• DOS Protected-Mode Interface
  • DETECT MODE
  • DOS Protected-Mode Interface - INSTALLATION CHECK

• DOS v2.11-2.13
  • OEM FUNCTION
  • OEM FUNCTION
  • OEM FUNCTION
  • OEM FUNCTION
  • OEM FUNCTION
  • OEM FUNCTION
  • OEM FUNCTION
  • DOS v2.11-2.13 - SET OEM INT 21 HANDLER

• DOS/V
  • DOUBLE-BYTE CHARACTER SET SHIFT CONTROL
  • FONT SUBSYSTEM ACCESS
  • READ/WRITE DOUBLE-BYTE CHARACTER SET CHARACTERS/ATTRIBUTES
  • DOS/V - SHIFT STATUS DISPLAY CONTROL

• DOS32 v3.0+
  • ALLOCATE 16KB DMA BLOCK
  • ALLOCATE MEMORY BLOCK
  • GET DOS32 ADDRESS INFORMATION
  • GET DOS32 VERSION AND SELECTOR VALUES
  • GET REAL MODE CALL BACK ADDRESS WITH IRET STACK FRAME
  • GET REAL MODE CALL BACK ADDRESS WITH RETF STACK FRAME
  • TERMINATE AND STAY RESIDENT
  • DOS32 v3.0+ - UNDO PREVIOUS MEMORY ALLOCATION or DMA BUFFER

• DOS32 v3.2+
  • LOAD LIBRARY FILE
  • DOS32 v3.2+ - SET UP A DOS32 LOADABLE LIBRARY

• DOSED.COM - INSTALLATION CHECK

• DOSISODE to WATTCP TSR Interface
  • accept
  • bind
  • close
  • connect
  • INSTALLATION CHECK
  • ioctl
  • listen
  • recvfrom
  • select
  • sendto
  • shutdown - SHUTDOWN INTERFACE
  • DOSISODE to WATTCP TSR Interface - socket

• DoubleDOS
  • ???
  • ???
  • ???
  • ???
  • ???
  • ???
  • ADD CHARACTER TO KEYBOARD BUFFER OF CURRENT JOB
  • ADD CHARACTER TO KEYBOARD BUFFER OF CURRENT JOB
  • CLEAR KEYBOARD BUFFER FOR CURRENT JOB
  • CLEAR KEYBOARD BUFFER FOR CURRENT JOB
  • GET CURRENT SCREEN BUFFER ADDRESS
  • GET VIRTUAL SCREEN ADDRESS
  • GET VIRTUAL SCREEN ADDRESS
  • GIVE AWAY TIME TO OTHER TASKS
  • GIVE AWAY TIME TO OTHER TASKS
  • GIVE UP REST OF CURRENT CLOCK TICK AND ALL OF NEXT TICK
  • GIVE UP TIME
  • INSTALLATION CHECK/PROGRAM STATUS
  • INSTALLATION CHECK/PROGRAM STATUS
  • MENU CONTROL
  • MENU CONTROL
  • OTHER PROGRAM STATUS
  • OTHER PROGRAM STATUS
  • SEND CHARACTER TO KEYBOARD BUFFER OF OTHER JOB
  • SEND CHARACTER TO KEYBOARD BUFFER OF OTHER JOB
  • SET TIMESHARING PRIORITY
  • SET TIMESHARING PRIORITY
  • SET/RESET KEYBOARD CONTROL FLAGS
  • SET/RESET KEYBOARD CONTROL FLAGS
  • TURN OFF TASK SWITCHING
  • TURN OFF TASK SWITCHING
  • TURN OFF TIMESHARING
  • TURN ON TASK SWITCHING
  • TURN ON TASK SWITCHING
  • DoubleDOS - TURN ON TIMESHARING

• DoubleTools v1.0 - GET ???

• DPMI 0.9+
  • ALLOCATE DOS MEMORY BLOCK
  • ALLOCATE LDT DESCRIPTORS
  • ALLOCATE MEMORY BLOCK
  • ALLOCATE REAL MODE CALLBACK ADDRESS
  • ALLOCATE SPECIFIC LDT DESCRIPTOR
  • CALL REAL MODE PROCEDURE WITH FAR RETURN FRAME
  • CALL REAL MODE PROCEDURE WITH IRET FRAME
  • CLEAR DEBUG WATCHPOINT
  • CREATE ALIAS DESCRIPTOR
  • DISCARD PAGE CONTENTS
  • DISCARD PAGES
  • FREE DOS MEMORY BLOCK
  • FREE LDT DESCRIPTOR
  • FREE MEMORY BLOCK
  • FREE REAL MODE CALLBACK ADDRESS
  • GET AND DISABLE VIRTUAL INTERRUPT STATE
  • GET AND ENABLE VIRTUAL INTERRUPT STATE
  • GET DESCRIPTOR
  • GET DPMI VERSION
  • GET FREE MEMORY INFORMATION
  • GET NEXT SELECTOR INCREMENT VALUE
  • GET PAGE SIZE
  • GET PROCESSOR EXCEPTION HANDLER VECTOR
  • GET PROTECTED MODE INTERRUPT VECTOR
  • GET RAW MODE SWITCH ADDRESSES
  • GET REAL MODE INTERRUPT VECTOR
  • GET SEGMENT BASE ADDRESS
  • GET STATE OF DEBUG WATCHPOINT
  • GET STATE SAVE/RESTORE ADDRESSES
  • GET VENDOR SPECIFIC API ENTRY POINT
  • GET VENDOR-SPECIFIC API ENTRY POINT
  • GET VIRTUAL INTERRUPT STATE
  • LOCK LINEAR REGION
  • LOCK SELECTOR
  • MARK PAGE AS DEMAND PAGING CANDIDATE
  • MARK PAGES AS PAGING CANDIDATES
  • MARK REAL MODE REGION AS PAGEABLE
  • PHYSICAL ADDRESS MAPPING
  • RELOCK REAL MODE REGION
  • RESET DEBUG WATCHPOINT
  • RESIZE DOS MEMORY BLOCK
  • RESIZE MEMORY BLOCK
  • SEGMENT TO DESCRIPTOR
  • SET DEBUG WATCHPOINT
  • SET DESCRIPTOR
  • SET DESCRIPTOR ACCESS RIGHTS
  • SET PROCESSOR EXCEPTION HANDLER VECTOR
  • SET PROTECTED MODE INTERRUPT VECTOR
  • SET REAL MODE INTERRUPT VECTOR
  • SET SEGMENT BASE ADDRESS
  • SET SEGMENT LIMIT
  • SIMULATE REAL MODE INTERRUPT
  • UNLOCK LINEAR REGION
  • DPMI 0.9+ - UNLOCK SELECTOR

• DPMI 1.0+
  • ALLOCATE LINEAR MEMORY BLOCK
  • ALLOCATE SHARED MEMORY
  • FREE PHYSICAL ADDRESS MAPPING
  • FREE SERIALIZATION ON SHARED MEMORY
  • FREE SHARED MEMORY
  • GET COPROCESSOR STATUS
  • GET DPMI CAPABILITIES
  • GET MEMORY BLOCK SIZE AND BASE
  • GET MEMORY INFORMATION
  • GET MULTIPLE DESCRIPTORS
  • GET PAGE ATTRIBUTES
  • GET PROTECTED MODE EXTENDED PROCESSOR EXCEPTION HANDLER
  • GET REAL MODE EXTENDED PROCESSOR EXCEPTION HANDLER
  • INSTALL RESIDENT HANDLER INIT CALLBACK
  • MAP CONVENTIONAL MEMORY IN MEMORY BLOCK
  • MAP DEVICE IN MEMORY BLOCK
  • MODIFY PAGE ATTRIBUTES
  • RESIZE LINEAR MEMORY BLOCK
  • SERIALIZE SHARED MEMORY
  • SET EMULATION
  • SET MULTIPLE DESCRIPTORS
  • SET PROTECTED MODE EXTENDED PROCESSOR EXCEPTION HANDLER
  • SET REAL MODE EXTENDED PROCESSOR EXCEPTION HANDLER
  • DPMI 1.0+ - TERMINATE AND STAY RESIDENT

• DR DOS $IDLE$ - IOCTL - DYNAMIC IDLE DETECTION CONTROL

• DR DOS 3.41+
  • DETERMINE DOS TYPE/GET DR DOS VERSION
  • DR DOS 3.41+ - SET GLOBAL PASSWORD

• DR DOS 3.41+ internal
  • GET ACCESS RIGHTS
  • DR DOS 3.41+ internal - SET ACCESS RIGHTS AND PASSWORD

• DR DOS 3.41,5.0 KEYB - GET CONFIGURATION
• DR DOS 3.41-5.0, Novell DOS 7 KEYB - INSTALLATION CHECK

• DR DOS 5.0
  • FIXUP SHARE STUB TABLE???
  • DR DOS 5.0 - NULL FUNCTION

• DR DOS 5.0 GRAFTABL
  • GET GRAPHICS DATA
  • DR DOS 5.0 GRAFTABL - INSTALLATION CHECK

• DR DOS 5.0 NLSFUNC - GET EXTENDED COUNTRY INFORMATION
• DR DOS 5.0+ - HISTORY BUFFER CONTROL
• DR DOS 5.0+ internal - GET POINTER TO INTERNAL VARIABLE TABLE
• DR DOS 5.0+ NLSFUNC - PREPARE CODE PAGE

• DR DOS 5.0-6.0
  • DETERMINE DOS TYPE
  • HISTORY BUFFER, SHARE, AND HILOAD CONTROL
  • SET GLOBAL PASSWORD
  • DR DOS 5.0-6.0 - SHARE/HILOAD CONTROL

• DR DOS 5.0-6.0 internal
  • GET ENCRYPTED PASSWORD
  • DR DOS 5.0-6.0 internal - SET EXTENDED FILE ATTRIBUTES

• DR DOS 6+, Novell DOS 7+ - EMM386.EXE - VIDEO MEMORY SPACE CONTROL

• DR DOS 6.0
  • GET FILE OWNER
  • GET SHARE STATUS
  • DR DOS 6.0 - SET FILE OWNER

• DR DOS 6.0 TaskMAX
  • CHECK IF TASK RUNNING PRIMARY COMMAND INTERPRETER
  • CHECK OPEN FILES
  • CONVERT TASK ID TO TASK INDEX
  • CONVERT TASK INDEX TO TASK ID
  • COPY DATA DIRECTLY INTO PASTE BUFFER
  • CREATE NEW TASK
  • DELETE TASK
  • ENABLE/DISABLE DIRECT SWITCHING
  • GET PASTE BUFFER STATUS
  • GET PER-TASK EMS LIMIT
  • GET STATUS
  • GET SWAP SPACE INFO
  • GET/SET NUMERIC PASTE DECIMAL POINT
  • GET/SET NUMERIC PASTE LEAD-IN
  • GET/SET PASTE LINE TERMINATOR STRING
  • GET/SET TEXT PASTE LEAD-IN
  • INITIATE EXPORTING TASK DATA
  • INITIATE PASTE OPERATION
  • INSTALLATION CHECK
  • NAME TASK
  • PASTE DATA DIRECTLY TO APPLICATION BUFFER
  • REGISTER/UNREGISTER TASK MANAGER
  • SET PER-TASK EMS LIMIT
  • SWITCH TO SPECIFIED TASK
  • DR DOS 6.0 TaskMAX - SWITCH TO TASK MANAGER

• DR DOS 6.0+ - BOOT PHASE BROADCASTS FOR MEMORYMAX/RPLOADER/SECURITY
• DR DOS 6.0+ DELWATCH.EXE - INSTALLATION CHECK
• DR DOS 6.0+ FDOS EXTENSIONS - INSTALL FDOS HOOK (SHARE / DELWATCH)

• DR DOS 6.0+ IBMBIO.COM
  • QUERY SIZE OF THE BDOS
  • QUERY SIZE OF THE BIOS
  • REGISTER ROOT OF UPPER MEMORY LINK
  • RELOCATE THE BDOS
  • DR DOS 6.0+ IBMBIO.COM - RELOCATE THE BIOS

• DR DOS v3.31+ - RUN ALREADY-LOADED KERNEL FILE

• DR Multiuser DOS
  • A_ATTACH - ATTACH AUX DEVICE
  • A_BREAK - SEND BREAK TO AUX DEVICE
  • A_CATTACH - CONDITIONALLY ATTACH TO AUX DEVICE
  • A_CONFIG - GET/SET AUX DEVICE PARAMETERS
  • A_CONTROL - GET/SET AUX CONTROL PARAMETERS
  • A_DETACH - DETACH FROM AUX DEVICE
  • A_GET - GET DEFAULT AUX DEVICE NUMBER
  • A_READ - READ CHARACTER FROM DEFAULT AUX DEVICE
  • A_READBLK - READ STRING FROM AUX DEVICE
  • A_SET - SET DEFAULT AUX DEVICE NUMBER
  • A_STATIN - GET INPUT STATUS OF AUX DEVICE
  • A_STATOUT - GET OUTPUT STATUS OF AUX DEVICE
  • A_WRITE - WRITE CHARACTER TO DEFAULT AUX DEVICE
  • A_WRITEBLK - WRITE STRING TO AUX DEVICE
  • DR Multiuser DOS - P_DELAY - DELAY EXECUTION

• DR Multiuser DOS 5.0 - API
• DR PalmDOS - GENERIC IOCTL - LOGIN SECURITY
• DR-DOS >7.03 - RESERVED
• DR-DOS NLSFUNC 4.01+ - ENHANCED INSTALLATION CHECK
• DRFAT32.SYS device driver - IOCTL INPUT

• DRIVER.SYS support
  • ADD NEW BLOCK DEVICE
  • EXECUTE DEVICE DRIVER REQUEST
  • DRIVER.SYS support - INSTALLATION CHECK

• DTown Utilities - POP UP

• DTown Utilities v1.40+
  • EXTENDED API INSTALLATION CHECK
  • GET POP-UP HANDLER ADDRESS
  • MEMORY VIEW SET ADDRESS
  • MEMORY VIEW SET REFERENCE
  • POP UP
  • DTown Utilities v1.40+ - UTILITY INSTALLATION CHECK

• DUBLDISK.SYS v2.6 - GET INFO

Interrups

Categories

Contents

Shopping Forum EMail Index Home

Search the web with Google