|
| Interrups | Categories | Contents |
AX = 0002h BH = function number (see #03346) DS:CX -> argument block (except BH=00h,1Ah) (see #03348)
Return:
AX = status (see #03347)
Notes: Either 3270/SNA or 3270/BSC interface may use AX=0002h, depending on which is loaded first. The other interface will use AX=000Ah. Status codes greater than 63h indicate an inconsistency in the 3270/SNA or 3270/BSC resident driver, which must be reloaded by the user
(Table 03346) Values for VINES 3270 interface function number: 00h "pi2reset" reset 3270/SNA or 3270/BSC driver 02h "pi2bsc" (3270/BSC only) 03h "pi2get" get information stored in 3270 resident driver 04h "pi2put" store information in 3270 resident driver 05h "pi2gcur" get current screen position 07h "pi2sdat" send data keystroke 08h "pi2scom" send command keystroke 0Ah "pi2field" get field info for arbitrary screen positions 0Fh "pi2stat" get logical unit/device status 12h "pi2nlus" determine logical unit/device assignment 13h "pi2gate" specifies comm port address to gateway service 14h "pi2attach" attach a logical unit/device 15h "pi2sdev" save logical unit/device info in resident driver (not supported in >3.0) 16h "pi2gdev" get device information (not supported in >3.0) 17h "pi2luinfo" get info about specific logical unit/device 18h "pi2gerr" get finer error detail 19h "pi2dhold" (3270/SNA only) holds a 3270 device 1Ah "pi2shut" release memory-resident module 1Ch "pi2sprof" save profile info in res driver (not supp in >3.0) 1Dh "pi2gprof" get prevsly stored profile info (not supp in >3.0)
(Table 03347) Values for VINES 3270 status: 0000h successful 000Bh invalid parameter or data does not fit data area 000Ch another code path currently active in resident driver 000Dh operation currently not allowed 0032h encountered connection disconnect error 0033h encountered "sosend" completion error 0034h encountered "sosend" communication error 0035h attach request refused. extended error info via "pi2gerr":. 01h resource unavailable. 02h invalid type. 03h version mismatch. 04h invalid logical unit number. 05h error during ARL processing. 06h no access for user 0071h encountered "sosock" error 0072h encountered unrecognizable error 0073h encountered "sowait" error (extended info via "pi2gerr") 0074h encountered invalid type-of-request on "sowait" 0075h encountered "sorec" error (extended info via "pi2gerr") 0076h encountered "sorec" completion error (ext info via "pi2gerr") 0077h encountered connection request 0078h encountered unrecognizable data 0079h encountered unknown connection ID (ext info via "pi2gerr")
See Also: #03325
Format of argument block for BH=03h,04h: Offset Size Description (Table 03348) 00h WORD size of data area (max 256) 02h N BYTEs data area
See Also: #03349 - #03350 - #03351
Format of argument block for BH=05h: Offset Size Description (Table 03349) 00h WORD logical unit/device number 02h WORD pointer to WORD buffer for cursor index 04h WORD pointer to BYTE buffer for current field attribute
See Also: #03348 - #03350 - #03351
Format of argument block for BH=07h: Offset Size Description (Table 03350) 00h WORD logical unit/device number 02h WORD ASCII data byte 04h WORD pointer to WORD count of characters which will need updating
See Also: #03348 - #03349 - #03351
Format of argument block for BH=08h: Offset Size Description (Table 03351) 00h WORD logical unit/device number 02h WORD 3270 keystroke (see #03352)
See Also: #03348 - #03349 - #03350 - #03353
(Table 03352) Values for 3270 keystroke: 0000h Enter 0001h Clear 0002h PA1 0003h PA2 0004h PA3 0005h PF1 ... 001Ch PF24 001Dh CSELECT (cursor select) 001Eh Insert 001Fh Delete 0020h EOField 0021h EINPUT (erase input) 0022h Reset 0023h Attention 0024h SysReq 0025h Duplicate 0026h Fieldmark 0027h Home 0028h NextLine 0029h Tab 002Ah BackTab 002Bh cursor up 002Ch cursor down 002Dh cursor right 002Eh cursor left 002Fh double cursor right 0030h double cursor left 0031h PRINT 0032h CANCEL 0033h Backspace
Format of argument block for BH=0Ah: Offset Size Description (Table 03353) 00h WORD logical unit/device number 02h WORD screen index 04h WORD pointer to WORD buffer for field length 06h WORD pointer to WORD buffer for offset in screen of field start
See Also: #03351 - #03354
Format of argument block for BH=0Fh: Offset Size Description (Table 03354) 00h WORD logical unit/device number 02h WORD clear mask (clear these bits of status after returning status) 04h WORD pointer to WORD buffer for device status (see #03355)
See Also: #03353 - #03356
Bitfields for Banyan 3270 device status: Bit(s) Description (Table 03355) 10 status modified 9 buffer modified 8 set cursor 5 sound alarm 1-0 size of print line for printer logical units. 00 unformatted line. 01 40-character line. 10 64-character line. 11 80-character line
Format of argument block for BH=12h: Offset Size Description (Table 03356) 00h WORD pointer to WORD buffer for number of logical units or devices 02h WORD pointer to WORD buffer for version number 04h WORD pointer to 64-byte buffer for logical unit/device list
See Also: #03354 - #03357
Format of argument block for BH=13h: Offset Size Description (Table 03357) 00h 16 BYTEs communications port address (see #03328)
See Also: #03356 - #03358
Format of argument block for BH=14h: Offset Size Description (Table 03358) 00h WORD logical unit/device number 0000h attach any free device of the specified type 02h WORD logical unit/device type (3270/SNA) 01h, 02h, or 03h (3270/BSC) 02h display (3270/BSC) 03h printer 04h WORD pointer to WORD buffer for attached logical unit/device number
See Also: #03357 - #03359
Format of argument block for BH=16h: Offset Size Description (Table 03359) 00h WORD pointer to 18-byte buffer for device block (see #03364) first WORD must be set to desired logical unit/device number
See Also: #03358 - #03360
Format of argument block for BH=17h: Offset Size Description (Table 03360) 00h WORD logical unit/device number 02h WORD pointer to information block in caller's DS (see #03365)
See Also: #03359 - #03361
Format of argument block for BH=18h: Offset Size Description (Table 03361) 00h WORD pointer to WORD buffer for major error code 02h WORD pointer to WORD buffer for minor error code
See Also: #03360 - #03362
Format of argument block for BH=19h: Offset Size Description (Table 03362) 00h WORD logical unit/device number
See Also: #03361 - #03363
Format of argument block for BH=1Ch,1Dh: Offset Size Description (Table 03363) 00h WORD pointer to profile block in caller's DS (see #03368)
See Also: #03348 - #03362
Format of device block, argument block for BH=15h: Offset Size Description (Table 03364) 00h WORD logical unit/device number 02h WORD logical unit/device type 04h WORD display model number 06h WORD numeric checking 08h WORD status line 0Ah BYTE unprotected normal field attribute 0Bh BYTE unprotected intensified field attribute 0Ch BYTE protected normal field attribute 0Dh BYTE protected intensified field attribute 0Eh WORD reserved 10h WORD printer port number
Format of information block: Offset Size Description (Table 03365) 00h WORD device model number 02h DWORD screen buffer pointer 06h DWORD status line pointer (see #03366) 0Ah DWORD reserved
Format of Banyan VINES 3270 status line: Offset Size Description (Table 03366) 00h BYTE comm line status 00h inactive 01h active 01h BYTE activation level 01h physical unit activated 02h logical unit also activated 03h session is bound 02h BYTE data traffic state 00h inactive 01h active 03h BYTE screen ownership 00h SLU->PLU session owns screen 01h SLU->SSCP session owns screen 04h BYTE keyboard status (see #03367) 05h BYTE insert mode 01h if in insert mode 06h BYTE numeric 01h if current screen buffer is numeric only 07h BYTE printer status 00h printer not assigned 01h printer is inactive 02h printer error 03h currently printing 04h printer is busy 05h printer is very busy 08h BYTE printer assignment 09h BYTE maximum size of network name 0Ah N BYTEs ASCIZ network name. BYTE maximum size of message window M BYTEs null-terminated message window. BYTE code set 00h EBCDIC 01h ASCII M BYTEs extended attributes 01h extended attributes are in effect (stored at screen+1920) each extended attribute specifies
bits 0,1:
00=normal, 01=blink, 10=reverse, 11=underscorbits 2-4:
000=default,001=blue,010=red,011=pink, 100=green,101=turquoise,110=yellow,111=white. BYTE extended color 01h other than base color is in effect(Table 03367) Values for Banyan VINES 3270 keyboard status: 00h UNLOCK - ready to accept data 01h TIME - aid was struck 02h SYSTEM - received response no restore 03h FUNCTION - unavailable keyboard function 04h INPUT - not currently used 05h ENDFIELD - field filled in insert mode 06h PROTECTED - attempt to enter in protected field 07h NUMERIC - attempt to enter in numeric field 08h PROGRAM - error in outbound data stream
Format of Banyan VINES 3270 profile block: Offset Size Description (Table 03368) 00h 64 BYTEs gateway service name 40h 16 BYTEs gateway comm port address 50h WORD primary logical unit number 52h WORD secondary logical unit type 54h WORD secondary logical unit number 56h WORD printer assignment 58h 50 BYTEs keyboard definitions filename
Category: IBM Workstation/Terminal Emulators - Int 61h - B
|
| Interrups | Categories | Contents |
|
