Int 7A/BX=0003h

Prev Next Ralf Interrups Categories Contents

------

Novell NetWare - IPX Driver - SEND PACKET

BX = 0003h
ES:SI -> Event Control Block (see #03810,#03811)

Notes: Returns immediately; IPX attempts to send the packet in the background. This function is supported by Advanced NetWare 1.02+. This function is nearly identical to BX=000Fh, except that it always copies the source address into the IPX header assumed to be at the beginning of the first fragment

See Also: BX=0004h - BX=000Fh - INT 21/AH=EEh"Novell"

Format of IPX Event Control Block: Offset Size Description (Table 03810) 00h DWORD Link 04h DWORD -> Event Service Routine (00000000h if none) (see #03814) 08h BYTE in use flag (see #03812) 09h BYTE completion code (see #03813) 0Ah WORD (big-endian) socket number (see #03809) 0Ch 4 BYTEs IPX workspace 10h 12 BYTEs driver workspace 1Ch 6 BYTEs immediate local node address 22h WORD fragment count 24h var fragment descriptors Offset Size Description 00h DWORD -> fragment data 04h WORD size of fragment in bytes.

Notes: ESR is a far procedure that is called when the ECB has been handled. On call, the in use flag is zero if the ECB has been handled, non-zero otherwise. If the flag is zero, the completion code holds the result of the event.. The first fragment should start with an IPX header (see #03815). All fragments are concatenated and sent in one piece. Node address FFh FFh FFh FFh FFh FFh broadcasts to all nodes

See Also: #03811

Format of AES-ECB: Offset Size Description (Table 03811) 00h DWORD Link 04h DWORD ESR (Event Service Routine) address (see #03814) 08h BYTE in use flag (see #03812) 09h 5 BYTEs AES workspace

See Also: #03810

(Table 03812) Values for ECB in use flag: 00h available E0h AES temporary F6h \ special IPX/SPX processing for v3.02+ F7h / F8h IPX in critical section F9h SPX listening FAh processing FBh holding FCh AES waiting FDh AES couting down delay time FEh awaiting packet reception FFh sending packet

See Also: #03810 - #03811 - #03813

(Table 03813) Values for ECB completion code: 00h success ECh remote terminated connection without acknowledging packet EDh abnormal connection termination EEh invalid connection ID EFh SPX connection table full F9h event should not be cancelled FAh cannot establish connection with specified destination FCh cancelled FDh malformed packet FEh packet undeliverable FFh physical error

See Also: #03810 - #03812

(Table 03814) Values Event Service Routine is called with:. AL = caller's identity (00h = AES, FFh = IPX). ES:SI -> event control block. Interrupts disabled

Return:
All registers preserved

See Also: #03810 - #03815

Format of IPX header: Offset Size Description (Table 03815) 00h WORD (big-endian) checksum 02h WORD (big-endian) length in bytes of total packet 04h BYTE transport control 05h BYTE packet type (see #03816) 06h 10 BYTEs destination internetwork address 10h WORD (big-endian) destination socket 12h 10 BYTEs source internetwork address 1Ch WORD (big-endian) source socket

Notes: An IPX packet has the identical format as a Xerox Network Standard (XNS) packet. The application must set packet type, destination address, and destination socket; IPX/SPX set the remaining fields

See Also: #03810 - #03826

(Table 03816) Values for IPX packet type: 00h unknown packet type 01h routing information packet 02h echo packet 03h error packet 04h packet exchange packet (always use this one for data) 05h SPX packet (see #03826) 11h NetWare Core Protocol (also used by Service Advertising Protocol) 14h Propagated Packet (for NetWare), NetBIOS name packet 15h-1Eh experimental protocols

Note: Undocumented packet type 14h will cross up to 16 networks deep in all directions; as Aaron Martin of Origin Systems discovered, the first 64 bytes of the IPX data in such packets should be considered reserved, as IPX places the traversed server nodes there.

Format of Service Advertising Protocol Service Query Packet: Offset Size Description (Table 03817) 00h 30 BYTEs IPX header 1Eh WORD (big-endian) query type 0001h general find service 0003h find nearest server 20h WORD (big-endian) server type (see #01890 at INT 21/AH=E3h"CONNECTION CONTROL")

See Also: #03818

Format of Service Advertising Protocol Server Identification Packet: Offset Size Description (Table 03818) 00h 30 BYTEs IPX header 1Eh WORD (big-endian) response type 0002h general service 0004h nearest service 20h 64N BYTEs server entries (1-7) (see #03819)

See Also: #03817 - #03820

Format of SAP server entry: Offset Size Description (Table 03819) 00h WORD (big-endian) server type (see #01890 at INT 21/AH=E3h"CONNECTION CONTROL") 02h 48 BYTEs ASCIZ server name 32h 2 WORDs (big-endian) network number 34h 3 WORDs (big-endian) node number 3Ch WORD (big-endian) socket number 3Eh WORD (big-endian) number of hops between caller and server 10h = Server Shutdown Advertising Packet

See Also: #03818

Format of IPX Routing Information packet: Offset Size Description (Table 03820) 00h 30 BYTEs IPX header 1Eh WORD operation (0001h request, 0002h response) 20h 8N BYTEs network entries (1-50) (see #03821)

See Also: #03818

Format of RIP network entry: Offset Size Description (Table 03821) 00h DWORD network number (FFFFFFFFh = general request) 04h WORD (response) number of hops 06h WORD (response) number of clock ticks to reach destination

Category: Netware - Int 7Ah - N

------

Prev Next Ralf Interrups Categories Contents

Sponsors
Shopping
Forum
Forum
email
EMail
Index
Index
Home
Home

Search the web with Google
Google
Google
Google

------