Interrups

Categories

Contents

• 3com BAPI SERIAL I/O
  • CONNECT TO PORT
  • DISCONNECT FROM PORT
  • EN/DISABLE ENTER COMMAND MODE (ECM) CHARACTER
  • ENTER COMMAND MODE
  • GET ECM WATCH STATE
  • GET/SET CONFIGURATION INFO
  • INSTALLATION CHECK
  • READ BLOCK
  • READ CHARACTER
  • READ STATUS
  • SEND SHORT BREAK
  • WRITE BLOCK
  • 3com BAPI SERIAL I/O - WRITE CHARACTER

• Alloy MW386 - ATTACH LOGICAL COMMUNICATIONS PORT TO PHYSICAL PORT
• Alloy MW386 v1.x only - RELEASE PHYSICAL COMMUNICATIONS PORT

• Alloy MW386 v2+
  • CHANGE PHYSICAL PORT PARAMETERS
  • GET PORT NUMBER FROM LOGICAL PORT ID
  • Alloy MW386 v2+ - RELEASE LOGICAL COMMUNICATIONS PORT

• ARTICOM
  • ATTACH ASYNCHRONOUS RESOURCE
  • DETACH ASYNCHRONOUS RESOURCE
  • GET ASYNCHRONOUS REDIRECTOR STATUS
  • GET AVAILABLE SERVER NAME
  • GET INTERNAL SEND/RECEIVE VECTOR
  • GET REDIRECTED PORT INFORMATION
  • GET RESOURCE INFORMATION
  • INSTALLATION CHECK
  • MODIFY FLOW CONTROL
  • SET INTERNAL SEND/RECEIVE VECTOR
  • SET SEND AND RECEIVE TIMEOUTS
  • TRANSLATE ERROR CODE TO ERROR STRING
  • ARTICOM - UNLOAD ASYNCHRONOUS REDIRECTOR FROM MEMORY

• AVATAR Serial Dispatcher
  • INSTALL IRQ3 HANDLER
  • INSTALL IRQ4 HANDLER
  • UNINSTALL IRQ3 HANDLER
  • AVATAR Serial Dispatcher - UNINSTALL IRQ4 HANDLER

• BitFOSS - INSTALLATION CHECK
• BitFOSSI - INSTALLATION CHECK
• BNU FOSSIL - INSTALLATION CHECK

• BWCOM14
  • INITIALIZE
  • INSTALLATION CHECK
  • BWCOM14 - SHUTDOWN

• COMM-DRV - EXTENDED INITIALIZATION

• COMM-DRV v14.0
  • FLUSH COMMUNICATION BUFFERS
  • GET HIGHEST ALLOWED PORT NUMBER
  • GET INT 14 FLAGS
  • GET INT 14 INFORMATION AREA
  • PORT CLEANUP
  • READ PACKET NONDESTRUCTIVELY
  • READ PORT METRICS - GET ERROR CODE AND BUFFER STATUS
  • READ PORT METRICS - GET I/O BUFFER SIZES
  • READ PORT METRICS - GET PORT PARAMETERS
  • READ PORT METRICS - GET PORT PARAMETERS
  • READ UART REGISTER
  • RECEIVE PACKET
  • RESTORE INT 14 VECTOR TO ORIGINAL
  • SEND PACKET
  • SET BAUD RATE DIVISOR
  • SET INPUT/OUTPUT TIMEOUTS
  • SET INT 14 FLAGS
  • SET USER INTERRUPT ROUTINE
  • TURN OFF DTR
  • TURN OFF RTS
  • TURN ON DTR
  • TURN ON RTS
  • COMM-DRV v14.0 - WRITE UART REGISTER

• COMMUNICATIONS FOSSIL
• Connection Manager CLIENT.EXE - ???

• COURIERS.COM
  • ABORT OUTPUT
  • CHECK IF PORT BUSY
  • CONFIGURE PORT
  • DECONFIGURE PORT
  • FLUSH PENDING INPUT
  • INSTALLATION CHECK
  • OUTPUT STATUS
  • READ CHARACTER
  • SEND BREAK
  • SEND SINGLE CHARACTER
  • SET SPEED
  • START INPUT
  • COURIERS.COM - START OUTPUT

• Digiboard
  • CCB COMMAND - BUFFER SET ALL
  • CCB COMMAND - IRQ POLLING TIMER TO HOST
  • CCB COMMAND - SET BAUD/DATABITS/STOPBITS/PARITY
  • CCB COMMAND - SET BREAK COUNT
  • CCB COMMAND - SET HANDSHAKE
  • CCB COMMAND - SET INTERRUPT TO HOST MASK
  • CCB COMMAND - SET MODEM LINES
  • CCB COMMAND - SET TRANSMIT MID-WATER MARK
  • CCB COMMAND - SET XON/XOFF CHARACTERS
  • CCB COMMAND - SPECIAL CHARACTER INTERRUPT
  • ENABLE/DISABLE MEMORY
  • Digiboard - GET NUMBER OF BOARDS INSTALLED

• Digiboard DigiCHANNEL PC/X - SPECIAL CHARACTER FLAG/COUNTER

• Digiboard DigiCHANNEL PC/X*
  • ALTERNATE STATUS CHECK
  • CCB COMMAND
  • CHANGE BAUD RATE
  • CHANGE PROTOCOL
  • CLEAR BUFFERS
  • CLEAR RECEIVE BUFFER
  • CLEAR TRANSMIT BUFFER
  • GET POINTER TO CH_KEY_RDY FLAG
  • GET TRANSMIT BUFFER FREE SPACE
  • INPUT QUEUE CHECK
  • READ STRING
  • SEND BIOS COMMAND
  • SPECIAL CHARACTER INTERRUPT
  • Digiboard DigiCHANNEL PC/X* - WRITE STRING

• EZRECV v1.0 - API
• FOSSIL (Fido/Opus/Seadog Standard Interface Level) - INITIALIZE

• FOSSIL
  • BREAK BEGIN OR END
  • DEINITIALIZE DRIVER
  • ENABLE OR DISABLE WATCHDOG PROCESSING
  • ENABLE/DISABLE FLOW CONTROL
  • EXTENDED ^C/^K CHECKING AND TRANSMIT ON/OFF
  • FLUSH OUTPUT BUFFER WAITING TILL ALL OUTPUT IS DONE
  • INITIALIZE DRIVER
  • INSERT/DELETE FUNCTION FROM TIMER TICK CHAIN
  • INSTALL AN EXTERNAL APPLICATION FUNCTION
  • KEYBOARD READ WITH WAIT
  • KEYBOARD READ WITHOUT WAIT
  • NON-DESTRUCTIVE READ AHEAD
  • PURGE INPUT BUFFER THROWING AWAY ALL PENDING INPUT
  • PURGE OUTPUT BUFFER THROWING AWAY ALL PENDING OUTPUT
  • RAISE/LOWER DTR
  • READ BLOCK
  • READ CURRENT CURSOR LOCATION
  • REBOOT SYSTEM
  • RECEIVE CHARACTER WITH WAIT
  • REMOVE AN EXTERNAL APPLICATION FUNCTION
  • RETURN INFORMATION ABOUT THE DRIVER
  • RETURN TIMER TICK PARAMETERS
  • SET CURRENT CURSOR LOCATION
  • SINGLE CHARACTER ANSI WRITE TO SCREEN
  • TRANSMIT NO WAIT
  • WRITE BLOCK
  • FOSSIL - WRITE CHARACTER TO SCREEN USING BIOS SUPPORT ROUTINES

• HP 100LX/200LX
  • SERIAL INTERFACE CONTROL
  • HP 100LX/200LX - SERIAL INTERFACE SELECT

• HP Vectra EX-BIOS
  • F14_EXINIT - INITIALIZE SERIAL PORT
  • F14_GET_BUFFER - READ DATA INTO BUFFER
  • F14_INQUIRE - INSTALLATION CHECK
  • F14_PUT_BUFFER - TRANSMIT BUFFER
  • HP Vectra EX-BIOS - F14_TRM_BUFFER - READ UNTIL TERMINATOR

• HUNTER 16
  • CONTROL CTS HANDSHAKING
  • CONTROL HANDSHAKE LINES
  • CONTROL RI POWER UP
  • CONTROL RS232 DRIVERS
  • EXTENDED CONTROL
  • EXTENDED PROTOCOL MENU
  • EXTENDED STATUS
  • GET DTR
  • GET EXTENDED PROTOCOL PARAMETERS
  • GET INSTALLED PROTOCOLS COUNT
  • GET PROTOCOL HANDLE
  • GET PROTOCOL NAME
  • READ COMMS PARAMETERS
  • SELECT COMMS PARAMETERS
  • HUNTER 16 - SET DTR

• IBM/Yale EBIOS SERIAL I/O
  • INSTALLATION CHECK
  • READ CHARACTER, NO WAIT
  • READ STATUS
  • REGAIN CONTROL
  • SEND BREAK
  • SET OUTGOING MODEM SIGNALS
  • SET RECEIVE BUFFER
  • IBM/Yale EBIOS SERIAL I/O - SET SEND BUFFER

• Interconnections Inc. TES
  • DROP A SESSION
  • GET LIST OF SERVER NAMES
  • GET LIST OF SESSIONS WITH STATUS
  • HOLD CURRENTLY ACTIVE SESSION
  • INSTALLATION CHECK/STATUS REPORT
  • RESUME A SESSION
  • SEND STRING TO COMMAND INTERPRETER
  • START A NEW SESSION
  • Interconnections Inc. TES - SWITCH TO NEXT ACTIVE SESSION

• MBBIOS
  • DROP DTR AND RTS
  • GET AVAILABLE BYTES
  • GET/SET OPTIONS
  • INITIALIZE PORT
  • INSTALLATION CHECK
  • LOWER ALL MODEM CONTROL SIGNALS
  • NON-DESTRUCTIVE READ
  • RAISE ALL MODEM CONTROL SIGNALS
  • RAISE DTR AND RTS
  • READ BUFFER
  • SEND BREAK
  • SET HANDSHAKE BYTE
  • MBBIOS - WRITE BUFFER

• MBBIOS PACCOM support
  • BUFFER MANAGEMENT
  • SET CRC WAIT
  • SET PERSISTENCE
  • SET SLOT TIME
  • MBBIOS PACCOM support - SET TXD

• Microsoft Systems Journal TSRCOMM INT14
  • CLEAR THE RECEIVE BUFFER
  • CLEAR THE TRANSMIT BUFFER
  • EXTENDED INITIALIZE
  • GET RECEIVE BUFFER COUNT
  • GET TRANSMIT BUFFER COUNT
  • INITIALIZE MODE
  • INSTALLATION CHECK
  • SET TIMEOUT
  • Microsoft Systems Journal TSRCOMM INT14 - UNINSTALL

• MultiDOS Plus
  • CLEAR BUFFERS
  • GET BUFFER CHARACTER COUNT
  • GET PORT STATUS
  • INITIALIZE PORT
  • RECEIVE CHARACTER
  • SET MONITOR MODE
  • MultiDOS Plus - TRANSMIT CHARACTER

• MultiDOS Plus 4.0 IODRV - GET AND RESET PORT LINE STATUS

• MultiDOS Plus IODRV
  • GET PORT STATUS
  • INITIALIZE PORT
  • READ CHARACTER FROM PORT
  • RESET PORT STATUS
  • MultiDOS Plus IODRV - WRITE CHARACTER TO PORT

• MX5 Extended FOSSIL
  • GET MNP STATUS BLOCK
  • GET/SET MNP ANSWER/ORIGINATE MODE
  • GET/SET MNP CONNECT SOUND LEVEL
  • GET/SET MNP LEVEL
  • GET/SET MNP WAIT TICKS
  • INSTALLATION CHECK
  • UNINSTALL
  • MX5 Extended FOSSIL - WAIT SPECIFIED NUMBER OF TICKS

• Novell NASI/NACS, Ungermann-Bass Net One SERIAL I/O
  • BUFFERED READ
  • BUFFERED WRITE
  • CONTROL
  • GET STATUS
  • Novell NASI/NACS, Ungermann-Bass Net One SERIAL I/O - INSTALL CHECK

• NPC NCSI EXTENDED SERIAL I/O
  • ALLOCATE A VIRTUAL CIRCUIT
  • CLEAR RECEIVE BUFFER
  • DISCONNECT A VIRTUAL CIRCUIT
  • EXTERNAL STATUS
  • GET STATUS
  • ISSUE CONTROL REQUEST
  • LOG AND/OR INITIALIZE VIRTUAL CIRCUIT
  • QUERY NAME SERVICE
  • READ DATA ON A VIRTUAL CIRCUIT
  • RECEIVE STATUS
  • SET/RETRIEVE REQUEST/REPLY SERVICE NAME
  • SET/RETRIEVE SERVICE ADDRESS
  • SET/RETRIEVE VIRTUAL CIRCUIT CONFIG
  • TRANSMIT BUFFER CONTROL
  • TRANSMIT STATUS
  • VIRTUAL CIRCUIT STATUS
  • NPC NCSI EXTENDED SERIAL I/O - WRITE DATA ON A VIRTUAL CIRCUIT

• PC-MOS/386 v5.01 $serial.sys v5.04
  • ???
  • CHANGE PORT PROTOCOL
  • CHECK OUTPUT QUEUE
  • DECLARE PORT OWNERSHIP
  • DISABLE PORT
  • DRIVER 'ID' FUNCTION
  • GET CURRENT PORT PARAMETERS
  • GET DRIVER DESCRIPTION
  • INPUT STATUS CHECK
  • INPUT STRING
  • LINK TO ANOTHER SERIAL DRIVER
  • OUTPUT CHARACTER, WITH TIMEOUT
  • OUTPUT STRING
  • RECEIVE CHARACTER, WITH TIMEOUT
  • REGISTER A PORT WITH A TERMINAL
  • RESET I/O BUFFER POINTERS
  • SELECTIVE BUFFER FLUSH
  • SEND RS-232 BREAK
  • PC-MOS/386 v5.01 $serial.sys v5.04 - WRITE MODEM CONTROL REGISTER

• RTS Control TSR - INSTALLATION CHECK

• SERIAL
  • Digiboard DigiCHANNEL PC/X* Extender INT 14 (XAPCM232.SYS)
  • EXTENDED COMMUNICATION PORT CONTROL (CONVERTIBLE,PS)
  • EXTENDED INITIALIZE (CONVERTIBLE,PS)
  • GET PORT STATUS
  • INITIALIZE PORT
  • READ CHARACTER FROM PORT
  • SERIAL - WRITE CHARACTER TO PORT

• Tandy 2000
  • SERIAL - FLUSH COMM BUFFER
  • Tandy 2000 - SERIAL - RESET COMM PORT

• Telebit ACS SERIAL I/O

• TFPCX
  • GET CHARACTER
  • GET VERSION
  • INSTALLATION CHECK
  • OUTPUT CHARACTER
  • TFPCX - TEST FOR CHARACTER WAITING

• X00 FOSSIL
  • ACTIVATE PORT
  • DEACTIVATE PORT
  • DESTRUCTIVE READ WITH NO WAIT
  • EXTENDED LINE CONTROL INITIALIZATION
  • EXTENDED SERIAL PORT STATUS/CONTROL
  • X00 FOSSIL - STUFF RECEIVE BUFFER

• YTERM - ???

• YTERM 1.4
  • ???
  • YTERM 1.4 - CLOCK SUPPORT

Interrups

Categories

Contents

Shopping Forum EMail Index Home

Search the web with Google