|
| Interrups | Categories | Contents |
Int 14
- SERIAL - Digiboard DigiCHANNEL PC/X* Extender INT 14 (XAPCM232.SYS)
Int 14/AH=00h
- SERIAL - INITIALIZE PORT
Int 14/AH=00h
- FOSSIL (Fido/Opus/Seadog Standard Interface Level) - INITIALIZE
Int 14/AH=00h
- Tandy 2000 - SERIAL - RESET COMM PORT
Int 14/AH=00h
- MBBIOS - INITIALIZE PORT
Int 14/AH=00h/DX=FFFFh
- Connection Manager - MODIFY DEFAULT CONNECTION PARAMETERS
Int 14/AH=01h
- SERIAL - WRITE CHARACTER TO PORT
Int 14/AH=01h/DX=FFFFh
- Connection Manager - SEND CHARACTER
Int 14/AH=02h
- SERIAL - READ CHARACTER FROM PORT
Int 14/AH=02h
- FOSSIL - RECEIVE CHARACTER WITH WAIT
Int 14/AH=02h/DX=FFFFh
- Connection Manager - RECEIVE CHARACTER
Int 14/AH=03h
- SERIAL - GET PORT STATUS
Int 14/AH=03h/DX=FFFFh
- Connection Manager - RETURN COMMUNICATION PORT STATUS
Int 14/AH=04h
- SERIAL - EXTENDED INITIALIZE (CONVERTIBLE,PS)
Int 14/AH=04h
- Tandy 2000 - SERIAL - FLUSH COMM BUFFER
Int 14/AH=04h
- FOSSIL - INITIALIZE DRIVER
Int 14/AH=04h
- MultiDOS Plus IODRV - INITIALIZE PORT
Int 14/AH=04h
- Digiboard DigiCHANNEL PC/X* - CHANGE BAUD RATE
Int 14/AH=04h
- MBBIOS - INSTALLATION CHECK
Int 14/AH=04h/DX=FFFFh
- Connection Manager - OPEN COMMUNICATION
Int 14/AX=0400h
- Microsoft Systems Journal TSRCOMM INT14 - INSTALLATION CHECK
Int 14/AX=0401h
- Microsoft Systems Journal TSRCOMM INT14 - INITIALIZE MODE
Int 14/AX=0402h
- Microsoft Systems Journal TSRCOMM INT14 - EXTENDED INITIALIZE
Int 14/AX=0403h
- Microsoft Systems Journal TSRCOMM INT14 - SET TIMEOUT
Int 14/AX=0404h
- Microsoft Systems Journal TSRCOMM INT14 - CLEAR THE RECEIVE BUFFER
Int 14/AX=0405h
- Microsoft Systems Journal TSRCOMM INT14 - GET RECEIVE BUFFER COUNT
Int 14/AX=0406h
- Microsoft Systems Journal TSRCOMM INT14 - CLEAR THE TRANSMIT BUFFER
Int 14/AX=0407h
- Microsoft Systems Journal TSRCOMM INT14 - GET TRANSMIT BUFFER COUNT
Int 14/AX=0408h
- Microsoft Systems Journal TSRCOMM INT14 - UNINSTALL
Int 14/AH=05h
- SERIAL - EXTENDED COMMUNICATION PORT CONTROL (CONVERTIBLE,PS)
Int 14/AH=05h
- FOSSIL - DEINITIALIZE DRIVER
Int 14/AH=05h
- MultiDOS Plus IODRV - READ CHARACTER FROM PORT
Int 14/AH=05h
- Digiboard DigiCHANNEL PC/X* - CHANGE PROTOCOL
Int 14/AH=05h
- MBBIOS - DROP DTR AND RTS
Int 14/AH=05h
- PC-MOS/386 v5.01 $serial.sys v5.04 - CHANGE PORT PROTOCOL
Int 14/AH=05h
- PhysTechSoft PTS ROM-DOS - SET PACKET
Int 14/AH=05h/DX=FFFFh
- Connection Manager - CLOSE COMMUNICATION
Int 14/AH=06h
- FOSSIL - RAISE/LOWER DTR
Int 14/AH=06h
- MultiDOS Plus IODRV - WRITE CHARACTER TO PORT
Int 14/AH=06h
- MBBIOS - RAISE DTR AND RTS
Int 14/AH=06h
- PC-MOS/386 v5.01 $serial.sys v5.04 - DRIVER 'ID' FUNCTION
Int 14/AH=06h
- TelAPI - WRITE BLOCK
Int 14/AH=06h
- PhysTechSoft PTS ROM-DOS - GET PACKET
Int 14/AH=06h/DX=FFFFh
- Connection Manager - SEND CHARACTER BLOCK
Int 14/AH=07h
- FOSSIL - RETURN TIMER TICK PARAMETERS
Int 14/AH=07h
- MultiDOS Plus IODRV - GET PORT STATUS
Int 14/AH=07h
- MBBIOS - SEND BREAK
Int 14/AH=07h
- PC-MOS/386 v5.01 $serial.sys v5.04 - SEND RS-232 BREAK
Int 14/AH=07h
- TelAPI - READ BLOCK
Int 14/AH=07h/DX=FFFFh
- Connection Manager - RECEIVE CHARACTER BLOCK
Int 14/AH=08h
- FOSSIL - FLUSH OUTPUT BUFFER WAITING TILL ALL OUTPUT IS DONE
Int 14/AH=08h
- MultiDOS Plus 4.0 IODRV - GET AND RESET PORT LINE STATUS
Int 14/AH=08h
- Digiboard DigiCHANNEL PC/X* - ALTERNATE STATUS CHECK
Int 14/AH=08h
- MBBIOS - NON-DESTRUCTIVE READ
Int 14/AH=08h
- PC-MOS/386 v5.01 $serial.sys v5.04 - INPUT STATUS CHECK
Int 14/AH=08h/DX=FFFFh
- Connection Manager - RETURN DEFAULT CONNECTION PARAMETERS
Int 14/AH=09h
- FOSSIL - PURGE OUTPUT BUFFER THROWING AWAY ALL PENDING OUTPUT
Int 14/AH=09h
- MultiDOS Plus IODRV - RESET PORT STATUS
Int 14/AH=09h
- Digiboard DigiCHANNEL PC/X* - CLEAR BUFFERS
Int 14/AH=09h
- MBBIOS - GET/SET OPTIONS
Int 14/AH=09h
- PC-MOS/386 v5.01 $serial.sys v5.04 - RESET I/O BUFFER POINTERS
Int 14/AH=09h/DX=FFFFh
- Connection Manager - SEND BREAK
Int 14/AH=0Ah
- FOSSIL - PURGE INPUT BUFFER THROWING AWAY ALL PENDING INPUT
Int 14/AH=0Ah
- Digiboard DigiCHANNEL PC/X* - INPUT QUEUE CHECK
Int 14/AH=0Ah
- MBBIOS - WRITE BUFFER
Int 14/AH=0Ah/DX=FFFFh
- Connection Manager - MODIFY ACTIVE CONNECTION PARAMETERS
Int 14/AH=0Bh
- FOSSIL - TRANSMIT NO WAIT
Int 14/AH=0Bh
- MBBIOS - READ BUFFER
Int 14/AH=0Bh/DX=FFFFh
- Connection Manager - PREPARE FOR INBOUND CONNECTION
Int 14/AH=0Ch
- FOSSIL - NON-DESTRUCTIVE READ AHEAD
Int 14/AH=0Ch
- MBBIOS PACCOM support - BUFFER MANAGEMENT
Int 14/AH=0Ch/DX=FFFFh
- Connection Manager - TEST FOR INBOUND CONNECTION REQUEST
Int 14/AH=0Dh
- FOSSIL - KEYBOARD READ WITHOUT WAIT
Int 14/AH=0Dh
- Digiboard DigiCHANNEL PC/X* - GET POINTER TO CH_KEY_RDY FLAG
Int 14/AH=0Dh
- MBBIOS PACCOM support - SET TXD
Int 14/AH=0Dh/DX=FFFFh
- Connection Manager - TERMINATE CONNECTION CLIENT ACTIVITY
Int 14/AX=0D00h
- MBBIOS - GET AVAILABLE BYTES
Int 14/AX=0D01h
- MBBIOS - LOWER ALL MODEM CONTROL SIGNALS
Int 14/AX=0D02h
- MBBIOS - RAISE ALL MODEM CONTROL SIGNALS
Int 14/AX=0D03h
- MBBIOS - SET HANDSHAKE BYTE
Int 14/AH=0Eh
- FOSSIL - KEYBOARD READ WITH WAIT
Int 14/AH=0Eh
- Digiboard DigiCHANNEL PC/X* - WRITE STRING
Int 14/AH=0Eh
- MBBIOS PACCOM support - SET PERSISTENCE
Int 14/AH=0Eh/DX=FFFFh
- Connection Manager - SET HARDWARE FLOW STATE
Int 14/AH=0Fh
- FOSSIL - ENABLE/DISABLE FLOW CONTROL
Int 14/AH=0Fh
- Digiboard DigiCHANNEL PC/X* - READ STRING
Int 14/AH=0Fh
- MBBIOS PACCOM support - SET SLOT TIME
Int 14/AH=0Fh/DX=FFFFh
- Connection Manager - RETURN ACTIVE CONNECTION PARAMETERS
Int 14/AH=10h
- FOSSIL - EXTENDED ^C/^K CHECKING AND TRANSMIT ON/OFF
Int 14/AH=10h
- Digiboard DigiCHANNEL PC/X* - CLEAR RECEIVE BUFFER
Int 14/AH=10h
- MBBIOS PACCOM support - SET CRC WAIT
Int 14/AH=10h/DX=FFFFh
- Connection Manager - QUERY SERVICE NAMES
Int 14/AH=11h
- FOSSIL - SET CURRENT CURSOR LOCATION
Int 14/AH=11h
- Digiboard DigiCHANNEL PC/X* - CLEAR TRANSMIT BUFFER
Int 14/AH=11h
- PC-MOS/386 v5.01 $serial.sys v5.04 - DISABLE PORT
Int 14/AH=12h
- FOSSIL - READ CURRENT CURSOR LOCATION
Int 14/AH=12h
- Digiboard DigiCHANNEL PC/X* - GET TRANSMIT BUFFER FREE SPACE
Int 14/AH=12h
- PC-MOS/386 v5.01 $serial.sys v5.04 - GET CURRENT PORT PARAMETERS
Int 14/AH=13h
- FOSSIL - SINGLE CHARACTER ANSI WRITE TO SCREEN
Int 14/AH=13h
- PC-MOS/386 v5.01 $serial.sys v5.04 - REGISTER A PORT WITH A TERMINAL
Int 14/AH=14h
- FOSSIL - ENABLE OR DISABLE WATCHDOG PROCESSING
Int 14/AH=14h
- PC-MOS/386 v5.01 $serial.sys v5.04 - OUTPUT STRING
Int 14/AH=14h
- Digiboard - GET NUMBER OF BOARDS INSTALLED
Int 14/AH=15h
- FOSSIL - WRITE CHARACTER TO SCREEN USING BIOS SUPPORT ROUTINES
Int 14/AH=15h
- PC-MOS/386 v5.01 $serial.sys v5.04 - INPUT STRING
Int 14/AH=15h
- Digiboard - ENABLE/DISABLE MEMORY
Int 14/AH=16h
- FOSSIL - INSERT/DELETE FUNCTION FROM TIMER TICK CHAIN
Int 14/AH=16h
- PC-MOS/386 v5.01 $serial.sys v5.04 - LINK TO ANOTHER SERIAL DRIVER
Int 14/AH=16h
- Digiboard DigiCHANNEL PC/X* - CCB COMMAND
Int 14/AX=1646h
- Digiboard - CCB COMMAND - SET INTERRUPT TO HOST MASK
Int 14/AX=1647h
- Digiboard - CCB COMMAND - SET BAUD/DATABITS/STOPBITS/PARITY
Int 14/AX=1649h
- Digiboard - CCB COMMAND - SET MODEM LINES
Int 14/AX=164Ah
- Digiboard - CCB COMMAND - SET BREAK COUNT
Int 14/AX=164Bh
- Digiboard - CCB COMMAND - SET HANDSHAKE
Int 14/AX=164Ch
- Digiboard - CCB COMMAND - SET XON/XOFF CHARACTERS
Int 14/AX=164Dh
- Digiboard - CCB COMMAND - SET TRANSMIT MID-WATER MARK
Int 14/AX=164Eh
- Digiboard - CCB COMMAND - IRQ POLLING TIMER TO HOST
Int 14/AX=164Fh
- Digiboard - CCB COMMAND - BUFFER SET ALL
Int 14/AX=1653h
- Digiboard - CCB COMMAND - SPECIAL CHARACTER INTERRUPT
Int 14/AH=17h
- FOSSIL - REBOOT SYSTEM
Int 14/AH=17h
- PC-MOS/386 v5.01 $serial.sys v5.04 - WRITE MODEM CONTROL REGISTER
Int 14/AH=18h
- FOSSIL - READ BLOCK
Int 14/AH=18h
- Digiboard DigiCHANNEL PC/X* - SEND BIOS COMMAND
Int 14/AH=18h
- PC-MOS/386 v5.01 $serial.sys v5.04 - GET DRIVER DESCRIPTION
Int 14/AH=19h
- FOSSIL - WRITE BLOCK
Int 14/AH=19h
- Digiboard DigiCHANNEL PC/X* - SPECIAL CHARACTER INTERRUPT
Int 14/AH=19h
- PC-MOS/386 v5.01 $serial.sys v5.04 - SELECTIVE BUFFER FLUSH
Int 14/AH=1Ah
- FOSSIL - BREAK BEGIN OR END
Int 14/AH=1Ah
- Digiboard DigiCHANNEL PC/X - SPECIAL CHARACTER FLAG/COUNTER
Int 14/AH=1Bh
- FOSSIL - RETURN INFORMATION ABOUT THE DRIVER
Int 14/AH=1Ch
- X00 FOSSIL - ACTIVATE PORT
Int 14/AH=1Dh
- X00 FOSSIL - DEACTIVATE PORT
Int 14/AH=1Eh
- X00 FOSSIL - EXTENDED LINE CONTROL INITIALIZATION
Int 14/AH=1Eh
- HUNTER 16 - READ COMMS PARAMETERS
Int 14/AH=1Fh
- X00 FOSSIL - EXTENDED SERIAL PORT STATUS/CONTROL
Int 14/AH=20h
- X00 FOSSIL - DESTRUCTIVE READ WITH NO WAIT
Int 14/AH=20h
- Alloy MW386 - ATTACH LOGICAL COMMUNICATIONS PORT TO PHYSICAL PORT
Int 14/AH=20h
- MultiDOS Plus - INITIALIZE PORT
Int 14/AH=20h
- PC-MOS/386 v5.01 $serial.sys v5.04 - CHECK OUTPUT QUEUE
Int 14/AH=20h
- HUNTER 16 - SELECT COMMS PARAMETERS
Int 14/AH=21h
- X00 FOSSIL - STUFF RECEIVE BUFFER
Int 14/AH=21h
- Alloy MW386 v1.x only - RELEASE PHYSICAL COMMUNICATIONS PORT
Int 14/AH=21h
- MultiDOS Plus - TRANSMIT CHARACTER
Int 14/AH=21h
- PC-MOS/386 v5.01 $serial.sys v5.04 - OUTPUT CHARACTER, WITH TIMEOUT
Int 14/AH=21h
- HUNTER 16 - EXTENDED CONTROL
Int 14/AH=22h
- Alloy MW386 v2+ - RELEASE LOGICAL COMMUNICATIONS PORT
Int 14/AH=22h
- MultiDOS Plus - RECEIVE CHARACTER
Int 14/AH=22h
- PC-MOS/386 v5.01 $serial.sys v5.04 - RECEIVE CHARACTER, WITH TIMEOUT
Int 14/AH=22h
- HUNTER 16 - EXTENDED STATUS
Int 14/AH=23h
- Alloy MW386 v2+ - GET PORT NUMBER FROM LOGICAL PORT ID
Int 14/AH=23h
- MultiDOS Plus - GET PORT STATUS
Int 14/AH=23h
- PC-MOS/386 v5.01 $serial.sys v5.04 - DECLARE PORT OWNERSHIP
Int 14/AH=23h
- HUNTER 16 - CONTROL HANDSHAKE LINES
Int 14/AH=24h
- Alloy MW386 v2+ - CHANGE PHYSICAL PORT PARAMETERS
Int 14/AH=24h
- MultiDOS Plus - SET MONITOR MODE
Int 14/AH=24h
- PC-MOS/386 v5.01 $serial.sys v5.04 - ???
Int 14/AH=24h
- HUNTER 16 - CONTROL CTS HANDSHAKING
Int 14/AH=25h
- MultiDOS Plus - CLEAR BUFFERS
Int 14/AH=25h
- HUNTER 16 - CONTROL RS232 DRIVERS
Int 14/AH=26h
- HUNTER 16 - CONTROL RI POWER UP
Int 14/AH=27h
- MultiDOS Plus - GET BUFFER CHARACTER COUNT
Int 14/AH=27h
- HUNTER 16 - GET INSTALLED PROTOCOLS COUNT
Int 14/AH=28h
- HUNTER 16 - GET PROTOCOL NAME
Int 14/AH=29h
- HUNTER 16 - GET PROTOCOL HANDLE
Int 14/AH=2Ah
- HUNTER 16 - EXTENDED PROTOCOL MENU
Int 14/AH=2Bh
- HUNTER 16 - GET EXTENDED PROTOCOL PARAMETERS
Int 14/AX=2C00h
- HUNTER 16 - GET DTR
Int 14/AH=2Ch
- HUNTER 16 - SET DTR
Int 14/AH=36h
- ComShare - INSTALLATION CHECK
Int 14/AX=4000h
- I1541 - INSTALLATION CHECK
Int 14/AX=4001h
- I1541 - TEST IF 1541 CABLE CONNECTED
Int 14/AX=4002h
- I1541 - SELECT LPT PORT FOR OUTPUT
Int 14/AX=4003h
- I1541 - RESET ALL DEVICES
Int 14/AX=4004h
- I1541 - SEND LISTEN SIGNAL
Int 14/AX=4005h
- I1541 - SEND SECONDARY ADDRESS FOR LISTEN
Int 14/AX=4006h
- I1541 - SEND UNLISTEN SIGNAL
Int 14/AX=4007h
- I1541 - SEND TALK SIGNAL
Int 14/AX=4008h
- I1541 - SEND SECONDARY ADDRESS FOR TALK
Int 14/AX=4009h
- I1541 - SEND UNTALK SIGNAL
Int 14/AX=400Ah
- I1541 - SEND A BYTE TO A DEVICE
Int 14/AX=400Bh
- I1541 - RECEIVE A BYTE FROM A DEVICE
Int 14/AX=400Ch
- I1541 - WAIT
Int 14/AX=400Dh
- I1541 - LONGWAIT
Int 14/AX=400Eh
- I1541 - GET INFO
Int 14/AH=56h
- BWCOM14 - INSTALLATION CHECK
Int 14/AH=57h
- BWCOM14 - INITIALIZE
Int 14/AH=58h
- BWCOM14 - SHUTDOWN
Int 14/AH=6Fh/BX=FFFEh
- Connection Manager - ???
Int 14/AH=6Fh/BX=FFFFh
- Connection Manager - INSTALLATION CHECK
Int 14/AX=6F00h
- HP Vectra EX-BIOS - F14_INQUIRE - INSTALLATION CHECK
Int 14/AX=6F01h
- HP Vectra EX-BIOS - F14_EXINIT - INITIALIZE SERIAL PORT
Int 14/AX=6F02h
- HP Vectra EX-BIOS - F14_PUT_BUFFER - TRANSMIT BUFFER
Int 14/AX=6F03h
- HP Vectra EX-BIOS - F14_GET_BUFFER - READ DATA INTO BUFFER
Int 14/AX=6F04h
- HP Vectra EX-BIOS - F14_TRM_BUFFER - READ UNTIL TERMINATOR
Int 14/AX=7000h
- NEWCOM - INSTALLATION CHECK
Int 14/AH=7Eh
- FOSSIL - INSTALL AN EXTERNAL APPLICATION FUNCTION
Int 14/AH=7Fh
- FOSSIL - REMOVE AN EXTERNAL APPLICATION FUNCTION
Int 14/AH=80h
- COMMUNICATIONS FOSSIL
Int 14/AH=80h
- COURIERS.COM - INSTALLATION CHECK
Int 14/AX=8000h
- ARTICOM - INSTALLATION CHECK
Int 14/AX=8000h
- COMM-DRV v14.0 - READ PORT METRICS - GET ERROR CODE AND BUFFER STATUS
Int 14/AX=8001h
- ARTICOM - UNLOAD ASYNCHRONOUS REDIRECTOR FROM MEMORY
Int 14/AX=8001h
- COMM-DRV v14.0 - READ PORT METRICS - GET PORT PARAMETERS
Int 14/AX=8002h
- ARTICOM - GET ASYNCHRONOUS REDIRECTOR STATUS
Int 14/AX=8002h
- COMM-DRV v14.0 - READ PORT METRICS - GET PORT PARAMETERS
Int 14/AX=8003h
- ARTICOM - TRANSLATE ERROR CODE TO ERROR STRING
Int 14/AX=8003h
- COMM-DRV v14.0 - READ PORT METRICS - GET I/O BUFFER SIZES
Int 14/AX=8004h
- ARTICOM - ATTACH ASYNCHRONOUS RESOURCE
Int 14/AX=8005h
- ARTICOM - DETACH ASYNCHRONOUS RESOURCE
Int 14/AX=8006h
- ARTICOM - GET RESOURCE INFORMATION
Int 14/AX=8007h
- ARTICOM - GET REDIRECTED PORT INFORMATION
Int 14/AX=8008h
- ARTICOM - GET AVAILABLE SERVER NAME
Int 14/AX=8009h
- ARTICOM - SET SEND AND RECEIVE TIMEOUTS
Int 14/AX=800Ah
- ARTICOM - MODIFY FLOW CONTROL
Int 14/AX=8025h
- ARTICOM - SET INTERNAL SEND/RECEIVE VECTOR
Int 14/AX=8035h
- ARTICOM - GET INTERNAL SEND/RECEIVE VECTOR
Int 14/AH=81h
- COURIERS.COM - CHECK IF PORT BUSY
Int 14/AH=81h
- COMM-DRV - EXTENDED INITIALIZATION
Int 14/AX=8100h
- VIDEO FOSSIL - RETURN VFOSSIL INFORMATION
Int 14/AX=8101h
- VIDEO FOSSIL - OPEN VFOSSIL
Int 14/AX=8102h
- VIDEO FOSSIL - CLOSE VFOSSIL
Int 14/AX=8103h
- VIDEO FOSSIL - UNINSTALL
Int 14/AH=82h
- KEYBOARD FOSSIL
Int 14/AH=82h
- COURIERS.COM - CONFIGURE PORT
Int 14/AH=82h
- COMM-DRV v14.0 - PORT CLEANUP
Int 14/AH=83h
- SYSTEM FOSSIL
Int 14/AH=83h
- COURIERS.COM - START INPUT
Int 14/AH=83h
- COMM-DRV v14.0 - FLUSH COMMUNICATION BUFFERS
Int 14/AH=84h
- COURIERS.COM - READ CHARACTER
Int 14/AH=84h
- COMM-DRV v14.0 - SEND PACKET
Int 14/AH=85h
- COURIERS.COM - FLUSH PENDING INPUT
Int 14/AH=85h
- COMM-DRV v14.0 - RECEIVE PACKET
Int 14/AH=86h
- COURIERS.COM - START OUTPUT
Int 14/AH=86h
- COMM-DRV v14.0 - SET INPUT/OUTPUT TIMEOUTS
Int 14/AH=87h
- COURIERS.COM - OUTPUT STATUS
Int 14/AH=87h
- COMM-DRV v14.0 - TURN ON DTR
Int 14/AH=88h
- COURIERS.COM - ABORT OUTPUT
Int 14/AH=88h
- COMM-DRV v14.0 - TURN OFF DTR
Int 14/AH=89h
- COURIERS.COM - SEND SINGLE CHARACTER
Int 14/AH=89h
- COMM-DRV v14.0 - TURN ON RTS
Int 14/AH=8Ah
- COURIERS.COM - SEND BREAK
Int 14/AH=8Ah
- COMM-DRV v14.0 - TURN OFF RTS
Int 14/AH=8Bh
- COMM-DRV v14.0 - SET USER INTERRUPT ROUTINE
Int 14/AH=8Ch
- COURIERS.COM - SET SPEED
Int 14/AH=8Ch
- COMM-DRV v14.0 - READ UART REGISTER
Int 14/AH=8Dh
- COURIERS.COM - DECONFIGURE PORT
Int 14/AH=8Dh
- COMM-DRV v14.0 - WRITE UART REGISTER
Int 14/AH=8Eh
- COMM-DRV v14.0 - READ PACKET NONDESTRUCTIVELY
Int 14/AH=A0h
- 3com BAPI SERIAL I/O - CONNECT TO PORT
Int 14/AH=A0h/CX=FFFFh
- Interconnections Inc. TES - INSTALLATION CHECK/STATUS REPORT
Int 14/AH=A1h
- 3com BAPI SERIAL I/O - DISCONNECT FROM PORT
Int 14/AH=A1h
- Interconnections Inc. TES - GET LIST OF SESSIONS WITH STATUS
Int 14/AH=A2h
- 3com BAPI SERIAL I/O - WRITE CHARACTER
Int 14/AH=A2h
- Interconnections Inc. TES - GET LIST OF SERVER NAMES
Int 14/AH=A3h
- 3com BAPI SERIAL I/O - READ CHARACTER
Int 14/AH=A3h
- Interconnections Inc. TES - START A NEW SESSION
Int 14/AH=A4h
- 3com BAPI SERIAL I/O - WRITE BLOCK
Int 14/AH=A4h
- Interconnections Inc. TES - HOLD CURRENTLY ACTIVE SESSION
Int 14/AH=A5h
- 3com BAPI SERIAL I/O - READ BLOCK
Int 14/AH=A5h
- Interconnections Inc. TES - RESUME A SESSION
Int 14/AH=A6h
- 3com BAPI SERIAL I/O - SEND SHORT BREAK
Int 14/AH=A6h
- Interconnections Inc. TES - DROP A SESSION
Int 14/AH=A7h
- 3com BAPI SERIAL I/O - READ STATUS
Int 14/AH=A7h
- Interconnections Inc. TES - SWITCH TO NEXT ACTIVE SESSION
Int 14/AH=A8h
- Interconnections Inc. TES - SEND STRING TO COMMAND INTERPRETER
Int 14/AH=A8h
- Novell TelAPI v4.01 - CONNECTION INFORMATION???
Int 14/AH=A9h
- Novell TelAPI v4.01 - CONNECTION CONTROL???
Int 14/AX=AA01h
- DimVGA v2.0+ - INSTALLATION CHECK
Int 14/AX=AA02h
- DimVGA v2.0+ - SET TIME-OUT (DIMMING/BLANKING) PERIOD
Int 14/AX=AA03h
- DimVGA v2.0+ - SET DIMMING FACTOR
Int 14/AX=AA04h
- DimVGA v2.0+ - GET TIME-OUT PERIOD
Int 14/AX=AA05h
- DimVGA v2.0+ - GET DIMMING FACTOR
Int 14/AX=AA06h
- DimVGA v2.0+ - DISABLE
Int 14/AX=AA07h
- DimVGA v2.0+ - ENABLE
Int 14/AX=AA08h
- DimVGA v2.0+ - DIM SCREEN 'MANUALLY'
Int 14/AX=AA09h
- DimVGA v2.0+ - UNDIM SCREEN 'MANUALLY'
Int 14/AX=AA0Ah
- DimVGA v2.0+ - CHECK WHETHER ENABLED
Int 14/AX=AA0Bh
- DimVGA v2.1+ - SET HOTKEY
Int 14/AX=AA0Ch
- DimVGA v2.1+ - GET HOTKEY
Int 14/AX=AA0Dh
- DimVGA v3.0+ - SET MOUSE CHECK STATUS
Int 14/AX=AA0Eh
- DimVGA v3.0+ - GET MOUSE CHECK STATUS
Int 14/AX=AA0Fh
- DimVGA v3.4 - SET LOCKING STATUS
Int 14/AX=AA10h
- DimVGA v3.4 - GET MOUSE CHECK STATUS
Int 14/AH=ADh
- IBM SurePath BIOS - Officially Private Function
Int 14/AH=AEh
- IBM SurePath BIOS - Officially Private Function
Int 14/AH=AFh
- IBM SurePath BIOS - Officially Private Function
Int 14/AX=AF00h/BX=AAAAh
- 3com BAPI SERIAL I/O - INSTALLATION CHECK
Int 14/AH=B0h
- 3com BAPI SERIAL I/O - EN/DISABLE ENTER COMMAND MODE (ECM) CHARACTER
Int 14/AH=B1h
- 3com BAPI SERIAL I/O - ENTER COMMAND MODE
Int 14/AH=B2h
- 3com BAPI SERIAL I/O - GET ECM WATCH STATE
Int 14/AH=B3h
- 3com BAPI SERIAL I/O - GET/SET CONFIGURATION INFO
Int 14/AH=E0h
- TelAPI - telopen - CREATE TELNET CONNECTION (BLOCKING)
Int 14/AX=E000h
- MX5 Extended FOSSIL - GET MNP STATUS BLOCK
Int 14/AX=E001h
- MX5 Extended FOSSIL - GET/SET MNP LEVEL
Int 14/AX=E002h
- MX5 Extended FOSSIL - GET/SET MNP ANSWER/ORIGINATE MODE
Int 14/AX=E003h
- MX5 Extended FOSSIL - GET/SET MNP WAIT TICKS
Int 14/AX=E004h
- MX5 Extended FOSSIL - GET/SET MNP CONNECT SOUND LEVEL
Int 14/AX=E005h
- MX5 Extended FOSSIL - UNINSTALL
Int 14/AX=E006h/BX=0000h
- MX5 Extended FOSSIL - INSTALLATION CHECK
Int 14/AX=E007h
- MX5 Extended FOSSIL - WAIT SPECIFIED NUMBER OF TICKS
Int 14/AH=E1h
- TelAPI - telclose - TERMINATE TELNET CONNECTION
Int 14/AH=E2h
- TelAPI - telread - BUFFERED READ
Int 14/AH=E3h
- TelAPI - telwrite - BUFFERED WRITE
Int 14/AH=E4h
- TelAPI - telioctl - CONNECTION CONTROL
Int 14/AH=E5h
- TelAPI - telreset - RESET ALL CONNECTIONS
Int 14/AH=E6h
- TelAPI - telunload - UNINSTALL
Int 14/AH=E7h
- TelAPI - tellist - GET TELNET SESSION LIST
Int 14/AH=E8h
- TelAPI - telattach - ATTACH COM PORT TO/FROM TELNET SESSION
Int 14/AH=E9h
- TelAPI - telportosn - GET SESSION NUMBER FOR COM PORT
Int 14/AH=EAh
- TelAPI - telstatus - GET TELNET CONNECTION STATUS INFORMATION
Int 14/AH=EBh
- TelAPI - telname - GET AVAILABLE/INUSE STATUS FOR ALL SESSIONS
Int 14/AH=ECh
- TelAPI - telnblkopen - CREATE TELNET CONNECTION (NON-BLOCKING)
Int 14/AH=EDh
- TelAPI - telpoll - POLL TELNET SESSION FOR CONNECTION COMPLETION
Int 14/AX=F0F0h
- ASAP v1.0 - ???
Int 14/AX=F0F1h/DX=0000h
- ASAP v1.0 - INSTALLATION CHECK
Int 14/AX=F4FFh
- IBM/Yale EBIOS SERIAL I/O - INSTALLATION CHECK
Int 14/AH=F9h
- IBM/Yale EBIOS SERIAL I/O - REGAIN CONTROL
Int 14/AH=FAh
- IBM/Yale EBIOS SERIAL I/O - SEND BREAK
Int 14/AH=FBh
- IBM/Yale EBIOS SERIAL I/O - SET OUTGOING MODEM SIGNALS
Int 14/AH=FCh
- IBM/Yale EBIOS SERIAL I/O - READ CHARACTER, NO WAIT
Int 14/AX=FD02h
- IBM/Yale EBIOS SERIAL I/O - READ STATUS
Int 14/AX=FF00h
- TelAPI - telcheck - INSTALLATION CHECK
Int 14/AX=FF01h
- IBM/Yale EBIOS SERIAL I/O - SET SEND BUFFER
Int 14/AX=FF02h
- IBM/Yale EBIOS SERIAL I/O - SET RECEIVE BUFFER
Int 14/AX=FFF8h
- COMM-DRV v14.0 - SET BAUD RATE DIVISOR
Int 14/AX=FFFBh
- COMM-DRV v14.0 - GET HIGHEST ALLOWED PORT NUMBER
Int 14/AX=FFFCh
- COMM-DRV v14.0 - GET INT 14 FLAGS
Int 14/AX=FFFDh
- COMM-DRV v14.0 - SET INT 14 FLAGS
Int 14/AX=FFFEh
- COMM-DRV v14.0 - RESTORE INT 14 VECTOR TO ORIGINAL
Int 14/AX=FFFFh
- COMM-DRV v14.0 - GET INT 14 INFORMATION AREA
|
| Interrups | Categories | Contents |
|
